Configuration > Jumbo Frame - D-Link DSG-1100-10/ME Manual

D-Link DGS-1100-10/ME User Manual
Figure 4.63 - Configuration > ISM VLAN Settings
ISM VLAN Global State: Enable or disable the IGMP Snooping Multicast (ISM) VLAN Global State.
Click the Apply button to confirm the ISM VLAN Global State.
VID: Add the corresponding VLAN ID of the Multicast VLAN. You may enter a value between 2 and 4094.
State: Use the drop-down menu to enable or disable the selected Multicast VLAN.
Member Ports: Enter a port or list of ports to be added to the Multicast VLAN. Member ports shall be the
untagged members of the multicast VLAN.
Tagged Member Ports: Enter a port or list of ports that will become tagged members of the Multicast VLAN.
VLAN Name: Enter the name of the new Multicast VLAN to be created. This name can be up to 32
characters in length.
Replace Source: This field is used to replace the source IPv4 or IPv6 address of incoming packets sent by
the host before being forwarded to the source port.
Source Ports: Enter a port or list of ports to be added to the Multicast VLAN. Source ports shall be the
tagged members of the multicast VLAN.
Click Add to add the ISM VLAN which will appear in the table, or click Clear All to clear all fields.
Click Edit button to modify the parameters and update the ISM VLAN Setting or click Delete to delete the
ISM VLAN.
Click View to display the detail information of ISM VLAN.
Figure4.64 - Configuration > IGMP Snooping > ISM VLAN Settings
Multicast Address: Select IPv4 or IPv6 and specify the IP address.
Click Add to create a new enter or click Delete All to remove all entries.
Configuration > Jumbo Frame
Jumbo Frame support is designed to enhance Ethernet networking throughput and significantly reduce the
CPU utilization of large file transfers like large multimedia files or large data files by enabling more efficient
larger payloads per packet. The Jumbo Frame page allows network managers to enable Jumbo Frames on
the device.
The Jumbo Frame default is disabled, Select Enabled and then click Apply to turn on the jumbo frame
support.
Figure 4.65 – Configuration > Jumbo Frame Settings
4 4 1 1