Step 3 - Plugging In The Ac Power Cord; Power Failure - D-Link DSG-1100-10/ME Manual

D-Link DGS-1100-10/ME User Manual
Step 3 – Plugging in the AC Power Cord
You may now connect the AC power cord into the rear of the switch and to an electrical outlet (preferably
one that is grounded and surge protected).

Power Failure

As a precaution, the switch should be unplugged in case of power failure. When power is resumed, plug the
switch back in.
Figure 2.2 – Wall mount installation
Figure 2.3 – Plugging the switch into an outlet
CAUTION: Do not turn on the power before the
power cables are connected. A power surge may
cause damage to the Switch.
4 4