Related Manuals for D-Link DSL-G2452DG
Summary of Contents for D-Link DSL-G2452DG
- Page 1 Version 1.00 | 29/01/2021 User Manual VDSL2/ADSL2+ Wireless AC1200 4-Port Gigabit Modem Router DSL-G2452DG...
-
Page 2: Preface
Trademarks D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies. -
Page 3: Table Of Contents
Home ....................18 Multiple SSID ..............44 Internet ...................19 Network ..................45 IPv4 ..................20 ALG ...................48 IPv6 ..................21 DS-Lite & CLAT ..............49 DSL ..................22 Share Port ................50 DSL-G2452DG ..............23 Create User ...............52 Connected Clients ..............24 Features ..................53 USB Device ................25 D-Link DSL-G2452DG User Manual... - Page 4 What is WPA? ..............97 System Log ................67 System Log ...............67 Technical Specifications ..........98 System Log View ............68 Regulatory Statements ...........99 Admin ..................69 System ................71 Upgrade .................72 Statistics .................73 CWMP ..................74 Connect a Wireless Client to your Router ......75 D-Link DSL-G2452DG User Manual...
-
Page 5: Product Overview
Phone Cable If any of the above items are missing, please contact your reseller. Note: Using a power supply other than the one included with the DSL-G2452DG may cause damage and void the warranty for this product. D-Link DSL-G2452DG User Manual... -
Page 6: System Requirements
Utility Requirements • Firefox 11 or higher • Safari 5 or higher • Chrome 17 or higher Windows Users: Make sure you have the latest version of Java installed. Visit ® www.java.com to download the latest version. D-Link DSL-G2452DG User Manual... -
Page 7: Introduction
Section 1 - Product Overview Introduction The D-Link DSL-G2452DG VDSL2/ADSL2+ Wireless AC1200 4-Port Gigabit Modem Router shares your DSL Internet connection over blazing-fast Wireless AC, and uses advanced AC beamforming technology to maximize the speed and range of your wireless signal to significantly outperform 802.11n and other older, non-beamforming capable 802.11ac devices. -
Page 8: Features
• Compatible with 802.11n/g/b/a Devices - The DSL-G2452DG is still fully compatible with the 802.11n, 802.11g, and 802.11a standards, so it can connect with existing 802.11n, 802.11g, 802.11b, and 802.11a wireless devices. -
Page 9: Hardware Overview
Connects to USB flash drives to share content or USB mobile dongles for Internet connectivity. Power Connector Connector for the supplied power adapter. Power Button Press the power button to power the DSL-G2452DG on and off. D-Link DSL-G2452DG User Manual... -
Page 10: Side Panel
Section 1 - Product Overview Side Panel USB 2.0 Port Connects to USB flash drives to share content or USB mobile dongles for Internet connectivity. D-Link DSL-G2452DG User Manual... -
Page 11: Leds
Blinking Green A blinking green light indicates Ethernet WAN port activity. Solid Green A solid green light indicates a proper connection to a DSL enabled telephone line. Blinking Green A blinking green light indicates the DSL port is negotiating a connection. D-Link DSL-G2452DG User Manual... -
Page 12: Installation
Note: This installation section is written for users who are setting up their home Internet service with the DSL-G2452DG Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router for the first time. If you are replacing an existing DSL modem and/or router, you may need to modify these steps. -
Page 13: Manual Setup
Telephone Outlet PHONE Microsplitter Connect the phone cable from the DSL port on the microsplitter to the DSL port of the DSL-G2452DG. Caution: To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. DSL-G2452DG... - Page 14 Power Adapter DSL-G2452DG Press the power button and verify that the power LED is lit. Allow one minute for the DSL-G2452DG to boot up. After it has powered up, verify that the Power and DSL LEDs are both lit. Power Internet Wireless 2.4...
- Page 15 Section 2 - Installation If you wish to use a wired connection, connect the Ethernet cable from a LAN port of the DSL-G2452DG to the Ethernet port on your computer. Ethernet Cable Computer If you wish to use a wireless connection, connect to either one of the wireless networks listed on the product label attached to the bottom of the DSL-G2452DG from your computer’s wireless utility.
-
Page 16: Getting Started
There are two ways you can configure your router to connect to the Internet and connect to your devices: • D-Link Setup Wizard - This wizard allows you to quickly set up your router. Refer to Setup Wizard on page 13. -
Page 17: Setup Wizard
'private browser' or incognito mode. The router’s home page will open displaying the current connection status. Click the Click to Repair button to run the Setup Wizard. Note: The system will automatically log out after a period of inactivity. D-Link DSL-G2452DG User Manual... - Page 18 Setup Wizard (continued) The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. If the router detects your Internet connection, you may need to enter your ISP information such as username and password.
- Page 19 DSL-G2452DG Wi-Fi Client To setup this Internet connection, you will need to have a User Name from your Internet Service Provider. If you do not have this information, please contact your ISP. Username: Password: Back Next D-Link DSL-G2452DG User Manual...
- Page 20 Section 3 - Getting Started Setup Wizard (continued) Create a Wi-Fi password (between 8-63 characters). Your wireless clients will need to have this passphrase or key entered to be able to connect to your wireless network. Click Next to continue. D-Link DSL-G2452DG User Manual...
- Page 21 Back to make changes. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. The device will reboot. Congratulations, your device has been successfully configured! D-Link DSL-G2452DG User Manual...
-
Page 22: Configuration
The Home page displays the current status of the router in the form of an interactive diagram. There are four main sections: Internet, DSL-G2452DG, Connected Clients, and USB Device. You can click each icon to display information about each section at the bottom of the screen. -
Page 23: Internet
Note: The Wizard will only configure the VDSL/ADSL WAN connections. Refer to page 13 for more information. For each of the WAN interfaces, you can see the connection status, IPv4, and IPv6 information. Clicking the DSL button will display DSL port information. D-Link DSL-G2452DG User Manual... -
Page 24: Ipv4
IP Address: The WAN IP address is listed here. Default Gateway: The default gateway IP address is listed here. Primary DNS Displays the current primary DNS server. Server: Secondary DNS Displays the current secondary DNS server. Server: D-Link DSL-G2452DG User Manual... -
Page 25: Ipv6
The WAN IPv6 address is listed here. Address: Default Gateway: The default gateway IP address is listed here. Primary DNS The primary DNS server IP address is listed here. Server: Secondary DNS The secondary DNS server IP address is listed here. Server: D-Link DSL-G2452DG User Manual... -
Page 26: Dsl
The DSL connection's attenuation is listed here. dB): Output Power (0.1 The DSL connection's power output is listed here. dBm): Attainable Rate The measured maximum attainable rate is listed here. (Kbps): Rate (Kbps): The negotiated connection speed is listed here. D-Link DSL-G2452DG User Manual... -
Page 27: Dsl-G2452Dg
Section 4 - Configuration DSL-G2452DG Click on the DSL-G2452DG icon to view details about the router and its wireless settings. Here you can see the router’s current wireless networks and passwords, as well as the local area network MAC, IPv4, and IPv6 addresses. -
Page 28: Connected Clients
Enter a specific IP address for this client if Reserve IP is enabled. Reserve IP: Parental Control: Enabled Enable to reserve this IP address for this client. Parental Control: Allow or Block access to the router. Save Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 29: Usb Device
If you have a USB device connected, you can see its name and how much free space it has. To configure your Storage Service settings, click Go to settings and refer to page 32 for more information. D-Link DSL-G2452DG User Manual... -
Page 30: Settings
Refer to Setup Wizard on page 13 for more information. Internet The following pages will describe how to manually configure how your DSL-G2452DG connects to the Internet. The DSL-G2452DG supports multiple WAN connection types and WAN failover. -
Page 31: Adsl
ADSL is one of the first home broadband technologies introduced. ADSL uses the DSL port on your DSL-G2452DG to connect to the Internet. In order for your DSL-G2452DG to use ADSL, you must configure the ADSL Settings, your ISP Settings, and your IPv4/IPv6 Settings. - Page 32 Select the method of encapsulation provided by your ISP. You can select LLC or VCMUX. ATM QoS: Select the Quality of Service type from the drop-down menu. Configure the associated settings Proceed to IPv4 Settings on page 32 or IPv6 Settings on page 37. D-Link DSL-G2452DG User Manual...
-
Page 33: Vdsl
VDSL is one of the latest and fastest home broadband technologies. VDSL uses the DSL port on your DSL-G2452DG to connect to the Internet. In order for your DSL-G2452DG to use VDSL, you must configure the VDSL Settings, your ISP Settings, and your IPv4/IPv6 Settings. -
Page 34: Residential Gateway
Section 4 - Configuration Residential Gateway Your DSL-G2452DG is equipped with a Gigabit Ethernet WAN port which can be used to connect to the Internet. This port may be used to connect to other Ethernet based networks. In order for your DSL-G2452DG to use Ethernet, you must configure the Ethernet Settings, VLAN Settings, and your IPv4/IPv6 Settings. -
Page 35: Usb
Section 4 - Configuration The DSL-G2452DG supports USB mobile broadband adapters. You can connect a mobile broadband adapter and share your cellular network connection with your home network. For a list of supported adapters, visit www.dlink.com. This page provides configuration settings for your USB mobile broadband connection. -
Page 36: Ipv4 Settings
Internet port’s MAC address with the MAC address of a connected client. Enable NAT: Enable or disable Network Address Translation. Proceed to IPv6 Settings on page 37 or click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 37: Dynamic Ip (Dhcp)
Internet port’s MAC address with the MAC address of a connected client. Enable NAT: Enable or disable Network Address Translation. Proceed to IPv6 Settings on page 37 or click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 38: Pppoe
Internet. PPPoE and PPPoA use the same configuration options. IPv4 Settings: My Internet Select PPPoE, as appropriate. Connection is: Username: Enter the username provided by your ISP. Password: Enter the password provided by your ISP. Reconnect Mode: Select either Always-on, On-Demand, or Manual. D-Link DSL-G2452DG User Manual... - Page 39 Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Enable NAT: Enable or disable Network Address Translation. Proceed to IPv6 Settings on page 37 or click Save when you are done. D-Link DSL-G2452DG User Manual...
-
Page 40: Bridged
Enter the secondary DNS server IP address assigned by your ISP. This Server: address is usually obtained automatically from your ISP. Enable NAT: Enable or disable Network Address Translation. Bridged Mode does not support IPv6 configuration. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 41: Ipv6 Settings
If you selected Use the following DNS address, the following options are available: Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 42: Static Ipv6
Enter the subnet prefix length supplied by your ISP. Length: Default Gateway: Enter the default gateway for your IPv6 connection. Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 43: Auto Configuration (Slaac/Dhcpv6)
If you selected Use the following DNS address, the following options are available: Primary DNS Enter the primary DNS server address. Server: Secondary DNS Enter the secondary DNS server address. Server: Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 44: Dsl Profile
Select the VDSL Profiles to enable. It is best to leave these at their Options: defaults unless otherwise instructed by your ISP. Advanced Settings Bitswap: Select whether to enable Bitswap. SRA: Select whether to enable SRA. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 45: Failover Wan
41 to check available options. Enable Interface: Select Enable to activate and configure the failover interface. Once saved, this interface will be used whenever the primary WAN is unavailable. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 46: Wireless
The default setting is 20 MHz for maximum compatibility. Visibility Status: The default setting is Visible. Select Invisible if you do not want to broadcast the SSID of your wireless network. Note: Making a network Invisible is not a form of security alone. D-Link DSL-G2452DG User Manual... - Page 47 Note: Making a network Invisible is not a form of security alone. Wi-Fi Protected Setup PBC: Press the Trigger PBC button to trigger WPS-PBC mode. This virtual WPS button replicates the physical WPS button functionality. Click Save when you are done. D-Link DSL-G2452DG User Manual...
-
Page 48: Multiple Ssid
Create a name for your wireless network using up to 32 characters. Password: Create a password to use for wireless security. Wireless clients will need to enter this password to successfully connect to the SSID. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 49: Network
Enter the starting and ending IP addresses for the DHCP server’s IP Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DSL-G2452DG User Manual... - Page 50 Advanced Settings - Address Autoconfiguration Settings Enable Automatic Enable or disable the Automatic IPv6 Address Assignment feature. IPv6 Address Assignment: Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful DHCPv6. Type: If you selected SLAAC+RDNSS or Stateless DHCP as the Autoconfiguration Type: D-Link DSL-G2452DG User Manual...
- Page 51 Network (continued) Router Enter the router address lifetime (in minutes). Advertisement Lifetime: If you selected Stateful DHCPv6 as the Autoconfiguration Type: IPv6 Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DSL-G2452DG User Manual...
-
Page 52: Alg
ALG Configuration Select Enable next to each ALG type to enable them. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 53: Ds-Lite & Clat
Auto or Manual. If Manual, enter the AFTR Address below. AFTR Address: If AFTR setup mode is set to Manual, enter the AFTR address proved to you by your ISP. CLAT Status: NAT64 Network: NAT64 Prefix Len: D-Link DSL-G2452DG User Manual... -
Page 54: Share Port
Status Enable or disable File Transfer Protocol (FTP) access to files stored on a USB device plugged into the router. FTP Directory: Select the device, file system, or drive to be accessible from the FTP server. D-Link DSL-G2452DG User Manual... - Page 55 DLNA Media Choose a name for your UPnP media server so that it can be found. Server: Note: TFTP does not support usernames or passwords. Use this feature with caution. Click Save when you are done. D-Link DSL-G2452DG User Manual...
-
Page 56: Create User
Click OK when you are done. The new user should be added to the list of user accounts. To save the new list, click Save. To return to the SharePort page, click SharePort. D-Link DSL-G2452DG User Manual... -
Page 57: Features
Enter the source port to apply the rule to. Dest IP: Enter the destination IP address range that the rule will apply to. Dest Port: Enter the destination port to apply the rule to. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 58: Advanced
DMZ IP Address: If DMZ is enabled, enter the IP address of the client you wish to expose, or use the drop-down menu to quickly select it. Wan Interface: Select an interface to which to apply the DMZ. D-Link DSL-G2452DG User Manual... -
Page 59: Virtual Server
Interface Select an interface to apply your rule to or select ALL. If you select a PTM, ATM, or ETH interface, you will be prompted to configure NAT Loopback. D-Link DSL-G2452DG User Manual... -
Page 60: Website Filter
New Rule. Next, under Website URL/Domain enter the URL or domain. If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish to edit a rule, simply replace the URL or domain. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 61: Static Routes
A value 1 is the lowest cost and 16 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply and Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 62: Ipv6
A value 1 is the lowest cost and 16 is the highest cost. Interface: Select the interface that the IP packet must use to transit out of the router when this route is used. Click Apply and Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 63: Dynamic Dns
IP address is. Owners of D-Link routers can use the dlinkdns service. In the Features menu on the bar on the top of the page, click Dynamic DNS. -
Page 64: Port Triggering
End Port: Enter the ending port range to forward to. Open Start Port: Enter the starting port range to open. Open End Port: Enter the ending port range to open. Click Apply when you are done. D-Link DSL-G2452DG User Manual... -
Page 65: Multicast
IPv4-based networks. MLD is used to managed multicast traffic for IPv4- based networks. WAN Connection: Select the interface to enable/disable. IGMP Proxy: Enable or disable the IGMP. MLD Proxy: Enable or disable the MLD. D-Link DSL-G2452DG User Manual... -
Page 66: Vpn/Ipsec
Select the WAN interface. Remote IPSec Enter the Remote Gateway IP address. Gateway: Tunnel Access From Enter Subnet or Single Address. Local IP Adress: IP Address: Enter the Network address. Mask: Enter the Snbnet or mask. D-Link DSL-G2452DG User Manual... - Page 67 Select the Encryption Algorithm type (DES / 3DES / AES) Algorithm: Intergrity Algorithm: Select the Intergrity Algorithm type (MD5 / SHA1) Difffie-Hellman Select 768bit, 1024bit, 1536bit or 2048bit Group: Key Life Time: Enter the life time. Click Apply when you are done. D-Link DSL-G2452DG User Manual...
-
Page 68: Vpn/Gre Tunnel
Enter your local device interface IP address. Address: Mask: Enter the Subnet mask. Tunnel Destination Enter your remote device Tunnel Destination IP Address. IP Address: Click Apply when you are done. Click Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 69: Management
Click Save when you are done. To configure and manage your schedules, click Parental Control and refer to Parental Control / Schedule on page 69. D-Link DSL-G2452DG User Manual... -
Page 70: Parental Control / Schedule
Select Deny to Internet if you wish to disable Internet access for this device at the specified Week: times. Time: (hh:mm-hh:mm) Deny to Internet: Internet Access will be denied during the times and on the days that have been selected above Apply Click Apply and Save when you are done. D-Link DSL-G2452DG User Manual... -
Page 71: System Log
Check this box to send the router logs to a SysLog Server. Syslog Server: If Logging to the Syslog Server is Enabled: Syslog Server IP Enter the IP address and port number of the SysLog server. Address: D-Link DSL-G2452DG User Manual... -
Page 72: System Log View
Select the level of logs to display. SysLog Clear: Click this button to clear the system log. SysLog Click this button to download the system log. DownLoad: SysLog Refresh: Click this button to refresh the system log. D-Link DSL-G2452DG User Manual... -
Page 73: Admin
The port number used to access the router is used in the URL. Example: Admin Port: http://x.x.x.x:8080 where x.x.x.x is the Internet IP address of the DSL-3590L and 8080 is the port used for the web management interface. D-Link DSL-G2452DG User Manual... - Page 74 Enable Remote Management to allow administrators to configure the network from outside. If you enabled remote management, enter the remote port number that the router will use for that protocol. Click Save when you are done. D-Link DSL-G2452DG User Manual...
-
Page 75: System
Section 4 - Configuration System This page allows you to save the DSL-G2452DG's current configuration, load a previously saved configuration, reset the router to its factory default settings, or reboot the DSL-G2452DG. From the Admin page, click System. To return to the Admin page, click Admin. -
Page 76: Upgrade
Section 4 - Configuration Upgrade This page allows you to upgrade the DSL-G2452DG's firmware or language pack, either automatically or manually. To manually upgrade the firmware or language pack, you must first download the relevant file from http://support.dlink.com. In the Management menu on the bar on the top of the page, click Upgrade. -
Page 77: Statistics
You can view the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5 GHz statistics by clicking on the respective tabs at the top. The graph will update in real time. To clear the information on the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DSL-G2452DG User Manual... -
Page 78: Cwmp
Section 4 - Configuration CWMP D-Link DSL-G2452DG User Manual... -
Page 79: Connect A Wireless Client To Your Router
Blu-ray DVD players, printers, and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DSL-G2452DG router. Please refer to your user manual for the wireless device you want to connect to make sure you understand how to enable WPS. -
Page 80: Windows® 10
Windows® 10 When connecting to the DSL-G2452DG wirelessly for the first time, you will need to input the wireless network name (SSID) and Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi configuration card, you can find the default network name and Wi-Fi password here. - Page 81 You can also use Wi-Fi Protected Setup (WPS) to connect to the router. Press the WPS button on your D-Link device and you will be automatically connected. D-Link DSL-G2452DG User Manual...
-
Page 82: Windows® 8
To join an existing network, locate the wireless network icon in the taskbar next to the time display. Wireless Icon Clicking on this icon will display a list of wireless networks that are within connecting proximity of your computer. Select the desired network by clicking on the network name. D-Link DSL-G2452DG User Manual... - Page 83 WPS button on your router during this step to enable the WPS function. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DSL-G2452DG User Manual...
-
Page 84: Windows® 7
If you are joining an existing network, you will need to know the security key or passphrase being used. Click on the wireless icon in your system tray (lower-right corner). Wireless Icon The utility will display any available wireless networks in your area. D-Link DSL-G2452DG User Manual... - Page 85 If you get a good signal but cannot access the Internet, check your TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. The following window appears while your computer tries to connect to the router. D-Link DSL-G2452DG User Manual...
- Page 86 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DSL-G2452DG User Manual...
-
Page 87: Windows Vista
(displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DSL-G2452DG User Manual... -
Page 88: Wpa/Wpa2
Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DSL-G2452DG User Manual... - Page 89 It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DSL-G2452DG User Manual...
-
Page 90: Troubleshooting
Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website, nor do you have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must be on the same IP subnet to connect to the web-based utility. - Page 91 • Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your web management.
- Page 92 • Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DSL-G2452DG User Manual...
- Page 93 • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DSL-G2452DG User Manual...
-
Page 94: Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business, or on public access wireless networks. Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when, and where you want it. -
Page 95: What Is Wireless
Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network. - Page 96 PDAs, headphones, laptops, speakers, and other devices that operate on batteries. Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it.
- Page 97 The wireless connection in public places is usually called “hotspots”. Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like: airports, hotels, coffee shops, libraries, restaurants, and convention centers.
-
Page 98: Wireless Modes
• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network adapters on each computer, such as two or more DSL-G2452DG wireless network USB adapters. An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. -
Page 99: Networking Basics
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. -
Page 100: Statically Assign An Ip Address
Set Primary DNS the same as the LAN IP address of your router (192.168.1.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DSL-G2452DG User Manual... -
Page 101: Wireless Security
Appendix B - Networking Basics Wireless Security This section will show you the different levels of security you can use to protect your data from intruders. The DSL-G2452DG offers the following types of security: • WPA2 (Wi-Fi Protected Access 2) •... -
Page 102: Technical Specifications
Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11n, and 802.11ac specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. • Frequency Range varies depending on country’s regulation. D-Link DSL-G2452DG User Manual... -
Page 103: Regulatory Statements
Potencia máxima de Salida Frequenza/e Potenza max. Output Frequentie(s) Max. Output Power 5.15 – 5.25 GHz 200 mW 5.25 – 5.35 GHz 200 mW 5.47 – 5.725 GHz 2.4 G 2.4 – 2.4835 GHz 100 mW D-Link DSL-G2452DG User Manual... - Page 104 υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink. com. Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux Français [French] directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit sont disponibles au téléchargement sur la page des produits à...
- Page 105 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu można pobrać na stronie produktu w witrynie www.dlink.com. Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade Português [Portuguese] com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do firmware...
- Page 106 Appendix D - Regulatory Statements Hér með lýsir D-Link Corporation því yfir að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun Íslenska [Icelandic] 2014/53/EB. Sækja má ESB-samræmisyfirlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
- Page 107 Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb auf 5 GHz innerhalb der EU. • Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt. D-Link DSL-G2452DG User Manual...
- Page 108 5 GHz dentro de la UE. • Por favor compruebe el manual o la ficha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5 GHz. D-Link DSL-G2452DG User Manual...
- Page 109 Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik in 5 GHz binnen de EU. • Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz. D-Link DSL-G2452DG User Manual...
- Page 110 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DSL-G2452DG User Manual...
- Page 111 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa D-Link DSL-G2452DG User Manual...
- Page 112 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek D-Link DSL-G2452DG User Manual...
- Page 113 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
- Page 114 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
- Page 115 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
- Page 116 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
- Page 117 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
- Page 118 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
- Page 119 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.