Table of Contents
Advertisement
Creating still picture from
motion picture
A single frame from the recorded motion picture
can be saved as a still picture.
1
Pause at the scene you want to
save as a still picture during
playback.
≥ It is convenient to use slow-motion playback
and frame-by-frame playback.
2
Press the
button fully.
Still picture is recorded.
≥ You might get a blurry still picture if you press
the
button without pausing.
≥ Date the motion picture was recorded will be
registered as date of the still picture. (The date
still picture was created will be registered if
there is no date recorded for the motion
picture.)
≥ Quality will be different from the normal still
picture.
Playing back motion
pictures by date
Scenes recorded on the same day can be played
back in succession.
1
Select
(By date), then press
the cursor button.
2
Select the playback date, then
press the cursor button.
The scenes recorded on the date selected are
displayed as thumbnails.
≥ Move the cursor button up or down to select
the playback date. Move the cursor button left
to select the last date of the previous month,
and move it to the right to select the last date of
the following month.
3
Select the scene to be played
back, then press the cursor
button.
≥ Select
(All scenes) and press the cursor
button to return to the playback of all scenes.
≥ Playing back of all the scenes returns if the
power is turned off or the mode dial is
operated.
≥ Even if scenes are recorded on the same day,
they are grouped separately in the following
cases.
jWhen the number of scenes exceeds 99
jWhen the SD card is repaired
jWhen the setting of [24pDIGITAL CINEMA]
is turned on/off*
jWhen the recording mode is changed from
*
HA/HG/HX to HE
or HE to HA/HG/HX
* –1, –2... is added after the recording date
displayed on the screen.
*
77
VQT1T64
Advertisement
Table of Contents
