Moto" Seat Post Receiver; Moto" Seat Post Release Lever; Kart Seat Lever (If So Equipped) - Sea-doo 2004 3D RFI Operation Manual

Firmly push the post in the seat until
you hear a "clunk".
CAUTION:
Make sure to maintain
the seat high enough so that the
post clears the body when rotated
forward into the seat. Make sure
that the post is latched properly.
Keep steering pole high enough and
rotate seat in steering pole. Firmly
push seat in steering pole until you
hear a "clunk".
CAUTION:
Make sure to maintain
the steering pole high enough so
that the "moto" seat clears the en-
gine cover when rotated forward
into the pole.
26) "Moto" Seat Post
The receiver locks the seat post into
position on the deck. For instructions,
refer to "MOTO" SEAT INSTALLA-
TION/STOWAGE above.
1. Receiver
27) "Moto" Seat Post
The lever releases the seat post from
within the seat. It is used also to
release the post from its receiver
on the deck. For instructions, re-
fer to "MOTO" SEAT INSTALLA-
TION/STOWAGE above.
28) Kart Seat Lever (if
The lever releases the latch locking the
seat on the deck.
Only remove or install the kart seat
when the watercraft is out of the
water or docked securely on calm
water.
_____________________
www.SeaDooManuals.net
Receiver
Release Lever
so equipped)
WARNING
43