About "Monitor" Screen - Fujitsu ARTG30LHTA Operating Manual

(4) Cancel button
Cancels the current selection and returns to previous
screen.
Operable control at the setting is displayed in the lower
left of each setting screen as follows:
•
When you press this button while setting, the setting is
canceled and returns to the previous screen.
Cancel:
XXXXXX
•
When this button is pressed after setting (or before set-
ting), it returns to the previous screen.
Back:
XXXXXX
(5) Cursor button
When up/down or left/right
on the screen, you can move the cursor to change the
selected items.
Up/down arrows are also displayed when the setting
item is adjustable or changeable.
NOTE: Press the marked part on the [Cursor button]. It
does not respond correctly when diagonally oper-
ating it.
(6) Enter button
Selects the highlighted item or finalize the setting.
NOTE: When switching to another setting screen before
the setting is completed, the cancel confirmation
screen is displayed. When canceling the setting,
select [Yes] with the [Cursor button (Left/Right)]
and press the [Enter button].
Setting change will be canceled. OK?
No
(7) Power indicator
Lights green when the unit is turned on, and goes off
when the unit is turned off.
NOTE: It blinks when an error occurs.
(8) On/Off button
Starts or stops the operation.
OK:
XXXXXX
Setting:
XXXXXX
arrows are displayed
Yes

1-4. About "Monitor" screen

"Monitor" screen shows several statuses such as the operat-
ing status of the air conditioner, function setting, or other cur-
rent operating conditions.
(1) Monitor
(2)
Mode
Cool
Menu
(5)
(1) Screen status and current conditions
Shows the current screen name, room temperature, day
of the week, and clock.
NOTES:
•
The clock can be changed to 24-hour clock, AM/PM
(12-hour: 12:00–11:59 or 0:00–11:59) clock. (Refer
to "5-2-4. Change display format setting".)
•
Room temperature indication is available only if the
"Room temp. display" function is enabled. (Refer to
"5-6. Room temp. display setting".)
(2) Icon display
Shows the function that is currently working or set.
NOTE: In this section, all the possible icons are dis-
played for description.
Icon
- Economy
Set temp. (temperature) auto
return
Set temp. (temperature) range
limitation
On timer
Off timer
Auto-off timer
Weekly timer
R.C. (Remote Controller) sensor
-
control
Automatic defrosting, oil
-
recovery, or mode mismatch
Filter cleaning notification
R.C. (Remote Controller)
-
prohibition
White icon on a black background:
Indicates that the function is valid and performing the
function or standby state.
Black icon on a white background:
Indicates that the controller is in non-operating state be-
cause R.C. prohibition on the primary unit is working, or
timer has been set, though the function is valid.
Room 28˚ Mo 10:00
C
Set temp. Fan
26
° C
High
Icon check:
Function name
(3)
(4)
See
page
12
12
13
14
15
22
16
28
35
26
-
En-4