Auto-Off Timer Setting - Fujitsu ARTG30LHTA Operating Manual

6. T o finalize the setting you have set in step 5, select [End]
with the [Cursor button (Up/Down)], and press the [Enter
button].
Example: Weekly timer setting screen for Zone (single)
Weekly timer setting
Weekly
Su Mo
1
Day
Zone ( sin g le ) Sensor: Secondary RC
Time
1
End
Back:
Time 8
If you press the [Cancel button] before you finalize the set-
ting, following cancel confirmation screen is displayed.
Setting change will be canceled. OK?
No
Select [No] or [Yes] with the [Cursor button (Left/Right)], and
press the [Enter button].
If you select [Yes] and press the [Enter button] here, all the
configured items in step 5 will be canceled.
If you select [No] and press the [Enter button] here, the
"Weekly timer setting" screen is displayed. To finalize the
setting, select [End] with the [Cursor button (Up/Down)] and
press the [Enter button].
Notes
• If any names have been registered for zones and
sensors in [Zone user setting], the registered names
are displayed on this screen.
• Only connected zones and sensor are displayed.
• When the "Weekly timer setting" screen is displayed
again after finalizing the setting, the set patterns you
have registered will be sorted in time order. (Sorting
function)
When you return to the "Monitor" screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Monitor
Weekly timer : Weekly 1
Cool
Menu
En-21
Mo 10:00
Heat 20
5 00 On
° C
Zone 1 Zone 2
Zone 3 Zone 4
Zone 5 Zone 6
Zone 7 Zone 8
Setting:
Time 2
Yes
Mo 10:00
26
° C
High
End:
Zone ( single )

4-2-4. Auto-off timer setting

In "Timer" screen, select [Auto-off timer] with the [Cursor
1
button (Up/Down)], and press the [Enter button].
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Back: Setting:
Function
"Auto-off timer" screen is displayed.
2
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Back: Setting:
Weekly timer
To change the setting, select the item with the [Cursor
button (Up/Down)], and press the [Enter button].
For [Enable/Disable setting], select [Enable] or [Disable]
3
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Cancel:
Weekly timer
For [Stop in], adjust the timer with the [Cursor button
4
(Up/Down)]. To complete the setting, press the [Enter
button].
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Cancel:
Weekly timer
Note
The set time can be set from 30 to 240 minutes in units
of 10 minutes.
Mo 10:00
Disable
Disable
Disable
Disable
Mo 10:00
Disable
30min.
Start End
0:00 0:00
On timer
Mo 10:00
Enable
30min.
Start End
0:00 0:00
OK:
On timer
Mo 10:00
Enable
120 min.
Start End
0:00 0:00
OK:
On timer