Table of Contents
Advertisement
5-3. Screen setting
In “Submenu” screen, select [Screen] with the [Cursor button
(Up/Down)], and press the [Enter button].
Submenu
[
]
1/2
Mo 10:00
Date and time
Screen
Filter sign
Off
R.C. sensor control
Room temp. display
Off
Back:
Setting:
Monitor
“Screen” screen is displayed.
Screen
Mo 10:00
Automatic
Brightness
Contrast
off time
30
S
OK:
Cancel:
Date and time
Filter sign
5-3-1. Automatic off time setting
In “Screen” screen, select [Automatic off time] with the
1
[Cursor button (Left/Right)], and set with the [Cursor
button (Up/Down)].
Screen
Mo 10:00
Automatic
Contrast
Brightness
off time
30
S
OK:
Cancel:
Date and time
Filter sign
Configurable values of [Automatic off time] are as follows:
• 30s
• 60s
• Off (No illumination)
Note
When the backlight is turned off by the [Automatic off
time], the first button operation is not effective, and illu-
minates the backlight.
If [Automatic off time] is set to [Off], it is effective from
the first button operation.
Other screen setting items can be set continually. To
2
complete the setting, press the [Enter button].
Screen returns to the “Submenu” screen.
En-25
5-3-2. Brightness setting
In “Screen” screen, select [Brightness] with the [Cursor
1
button (Left/Right)], and set with the [Cursor button (Up/
Down)].
Screen
Mo 10:00
Automatic
Contrast
Brightness
off time
30
S
Cancel:
OK:
Date and time
Filter sign
Notes
•
The set is reflected while setting it.
• hen the automatic off time setting is set in “Off”,
W
Brightness setting is not displayed (It is not possible
to set it).
Other screen setting items can be set continually. To
2
complete the setting, press the [Enter button].
Screen returns to the “Submenu” screen.
5-3-3. Contrast setting
In “Screen” screen, select [Contrast] with the [Cursor
1
button (Left/Right)], and set with the [Cursor button (Up/
Down)].
Screen
Mo 10:00
Automatic
Brightness
Contrast
off time
30
S
Cancel:
OK:
Date and time
Filter sign
Note
The set is reflected while setting it.
Other screen setting items can be set continually. To
2
complete the setting, press the [Enter button].
Screen returns to the “Submenu” screen.
5-4. Filter sign setting
Note
This function can be used only if the setting is activated
in the installation. To activate this function, consult
authorized service personnel.
- Quick Links:
- Operating Manual
- Error Code
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
