Cleaning And Care; Error Code - Fujitsu ARTG30LHTA Operating Manual

Lower case:
You can select and enter desired lower case.
In "Lower case" screen, set the cursor to the target letter with
the [Cursor button], and press the [Enter button].
Selected letter is displayed in the text field.
Name setting ( Zone 1 )
a b c d e f g h i j k l m n o p q r
s t u v w x y z & ( )
0 1 2 3 4 5 6 7 8 9 -
Back Space
Cancel:
Capital
Preset names:
You can select and enter desired preset name.
In "Preset names" screen, set the cursor to the target name
with the [Cursor button], and press the [Enter button].
Selected name is displayed in the text field.
Name setting ( Zone 1 )
Living
Bedroom
Lounge
Back Space
Cancel:
Lower case
Note
Maximum text number you can enter is 12 characters
including a space. If you try to enter the 13th character,
message indicating that the entering text number is
exceeding is displayed in the text field as follows:
(The 13th character is not displayed.)
Name setting ( Zone 1 )
Bedroom (Gue
a b c d e f g h i j k l m n o p q r
s t u v w x y z & ( )
0 1 2 3 4 5 6 7 8 9 -
Back
Space
Cancel:
Capital
Set the cursor to [End] with the [Cursor button],
4
and press the [Enter button] to finalize the name
registration.
Screen returns to the "Name setting" screen, and regis-
tered name is displayed.
Mo 10:00
+ ; : . , / _
End
Enter:
Preset names
Mo 10:00
Family Dining
Kitchen Study
Meals Rumpus
End
Enter:
Capital
Mo 10:00
Over
+ ; : . , / _
End
Enter:
Preset names

6. CLEANING AND CARE

Before cleaning the unit, be sure to stop the operation and
disconnect the power supply.
Do not pour water or cleaning solvent on the unit directly,
or wash the unit with them.
Do not expose the unit body to liquid insecticides or hair
sprays.
Keep the surroundings of the outdoor unit clean and
tidy, and do not place anything around it. If it is covered
with fallen leaves, there could be an infiltration of small
animals or insects which in contact with internal electrical
components may lead to product malfunction.
Text field
Do not stand on unstable steps when operating or cleaning
the air conditioner. It may overturn and can cause injuries.
Wipe the unit gently by using soft dry cloth.
Note
Do not use scouring cleanser, volatile solvents such as
benzene or thinner.

7. ERROR CODE

If an error occurs, the power indicator (green) blinks and the
following screen will be shown.
If "Error" is displayed, immediately stop the air conditioner
operation, and consult authorized service personnel.
Text field
•
When there is an error on this remote controller:
Error
Error code
Er 12.1
EE 1c
Er 15.4
EE 1d
Er CC.1
EE CC.1
•
When there is an error on the indoor unit:
Error
Monitor
CAUTION
Remote controller
Code : XXXXXX
Contents
Wired remote controller communication
error
Indoor unit data acquisition error
Remote controller sensor error
Address number of the relevant indoor unit
R.C. address : 00
Code : XXXXXX
Mo 10:00
Error
code
Mo 10:00
Error
code
En-32