Related Manuals for Fujitsu ARTG12LL
Summary of Contents for Fujitsu ARTG12LL
- Page 1 OPERATING MANUAL HEAT & COOL MODEL (REVERSE CYCLE) AIR CONDITIONER Duct Type Indoor Unit ARTG09LL ARTG12LL ARTG18LL KEEP THIS MANUAL FOR FUTURE REFERENCE P/N9374379439...
-
Page 2: Table Of Contents
CONTENTS SAFETY PRECAUTIONS ........1 WEEKLY TIMER ............8 FEATURES AND FUNCTIONS ....... 2 TEMPERATURE SET BACK TIMER ..... 10 NAME OF PARTS ........... 3 ECONOMY OPERATION ........11 PREPARATORY OPERATION ........ 4 CLEANING AND CARE ..........11 OPERATION ............5 TROUBLESHOOTING .......... 12 TIMER FUNCTIONS .......... -
Page 3: Features And Functions
FEATURES AND FUNCTIONS ■ ■ Energy saving and Clean function Comfortable function REMOVABLE AIR FILTER INVERTER The indoor unit’s air ¿ lter can be removed for easy cleaning and maintenance. At the start of operation, large amount of power is used to bring the room quickly to the desired temperature. -
Page 4: Name Of Parts
NAME OF PARTS Remote controller 1 START/STOP Button C Horizontal AirÀ ow Direction and 2 SET TEMP. (Temperature) Button Swing Button 3 MODE Button D MAINTENANCE(FILTER RESET) 4 FAN Button Button 5 ECONOMY Button E Operation Lamp 6 TIMER MODE (CLOCK AD- F Timer and Clock Display G Operation Mode Display JUST) Button... -
Page 5: Preparatory Operation
PREPARATORY OPERATION Set the current day and time Press the DAY button and select the current day. appears around the selected day. Press the TIMER MODE (CLOCK ADJUST) button for 2 seconds or more. The time display on the remote controller will À ash. Press the SET TIME (<... -
Page 6: Operation
OPERATION Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). To start/stop operation Press the START/STOP button. Operation lamp Air conditioner ON: Lit brightly Air conditioner OFF: Not lit To set the operation mode ●... - Page 7 OPERATION Room temperature sensor selection • This function is locked at the factory. In order to detect the room temperature correctly, consult authorized serv- ice personnel when using this function. Indoor unit Press the ECONOMY button for more than 2 seconds to select whether the room temperature is detected at the indoor unit or the remote controller.
-
Page 8: Timer Functions
TIMER FUNCTIONS OFF timer (See page 7.) Use this timer function to stop air conditioner operation. The timer operates and air conditioner operation stops after the set time has passed. The timer can be set up to 24 hours in advance. ON timer (See page 7.) Use this timer function to start air conditioner operation. -
Page 9: Weekly Timer
WEEKLY TIMER Weekly timer setting Press the TIMER SET button for Press the TIMER MODE button to select the weekly timer. 2 seconds or more. ● Day of the week setting Press the DAY button to select the day of the week, and then press the TIMER SET button to con¿... - Page 10 WEEKLY TIMER WEEKLY timer operation ● To start ● To cancel When the weekly timer is selected, the • Press the TIMER DELETE button to ex. Operating time 7:00-18:00 timer starts automatically. cancel the timer mode. • The timer mode can also be The operating time for the current day canceled by changing the timer is displayed.
-
Page 11: Temperature Set Back Timer
TEMPERATURE SET BACK TIMER Temperature SET BACK timer setting SET BACK If there is no existing SET BACK tempera- ture setting, “- -” will be displayed for the temperature. Press the TIMER SET button Press the SET BACK button to change to the SET BACK con- ¿... -
Page 12: Economy Operation
ECONOMY OPERATION Begin Air Conditioner operation before performing this procedure. To Use the ECONOMY Operation Press the ECONOMY button. The ECONOMY display will light. ECONOMY operation begins. To Stop the ECONOMY Operation Press the ECONOMY button again. The ECONOMY display will go out. Normal operation begins. -
Page 13: Troubleshooting
TROUBLESHOOTING Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). In the event of a malfunction (burning smell, etc.), immediately stop operation, turn off the electrical WARNING! breaker, and consult authorized service personnel. Merely turning off the unit’s power switch will not completely disconnect the unit from the power source. - Page 14 TROUBLESHOOTING Symptom Problem See Page ● Has the circuit breaker been turned off? CHECK ONCE Doesn’t operate at all: ● Has there been a power failure? MORE — ● Has a fuse blown out, or a circuit breaker been tripped? ●...
-
Page 15: Operating Tips
OPERATING TIPS Instructions relating to heating (*) are applicable only to “HEAT & COOL MODEL” (Reverse Cycle). *Heating Performance Low Ambient Cooling ● This air conditioner operates on the heat-pump principle, ● When the outdoor temperature drops, the outdoor unit’s fans absorbing heat from outdoor air and transferring that heat may switch to Low Speed, or one of the fans may stop inter- indoors. - Page 16 OPERATING TIPS Mode operation: AUTO COOLING MODEL ● During the Drying mode operation, the fan will operate at a ● When the room temperature is 2 °C higher than the set low speed for a gently cooling effect during which the fan temperature, the mode will switch between Cooling and may temporarily stop rotating.
-
Page 17: Self-Diagnosis
OPERATING TIPS AUTO Restart In Event of Power Interruption ● Should the power supply to the air conditioner be interrupted ● Use of other electrical appliances (electric shaver, etc.) or by a power failure, the air conditioner will restart automatically nearby use of a wireless radio transmitter may cause the air in the previously selected mode once the power is restored. - Page 18 NOTE...
- Page 19 NOTE...