Fujitsu ARTG30LHTA Operating Manual page 23

For [Valid hour], applicable time slot for the Auto-off
5
timer can be set.
Set the time with the [Cursor button (Up/Down)], and
press the [Enter button].
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Cancel:
Weekly timer
Notes
•
Counting down of the Auto-off timer is valid only if the
air conditioning operation has been started with the
[On/Off button] of this remote controller. When Auto-off
timer become active, following message is displayed
on the screen.
Auto-off timer start
Menu
•
Even if the valid hour is ended during Auto-off timer is
working, the function will work after the set time in [Stop
in] elapsed.
•
The timer started counting down within the valid hour
of the function, even if the current time is being out of
the valid hour during the counting down, the function
works.
•
If the air conditioning operation is On by Weekly timer
after counting down of Auto-off timer has started, the
Auto-off timer will not work.
When you return to the "Monitor" screen, and current time is
within the valid hour, the icon is displayed as follows.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Monitor
Cool
Menu
If the current time is out of the valid hour, the icon will be dis-
played as follows:
Monitor
Mo 10:00
Enable
120 min.
Start End
6 00 0:00
OK:
On timer
Mo 10:00
Auto-off timer
26
° C
High
End:
Mo 10:00
Auto-off timer
Displayed icon color and the message differs by the condition
as follows:
•
Current time is within the valid hour, and the operation has
been started by pressing the [On/Off button]:
When the Auto-off timer is enabled, white icon on black back-
ground and the message balloon with the remaining time until
the timer expires are displayed.
Monitor
Auto-off timer: Remaining 120 minutes
Cool
Menu
Mo 10:00
26
° C
High
End:
En-22