Temperature Unit Setting; Zone User Setting; Day/Night Setting - Fujitsu ARTG30LHTA Operating Manual

5-8-2. Temperature unit setting

In "Initial" screen, select [Temp. unit] with the [Cursor
1
button (Up/Down)], and press the [Enter button].
Initial
Language
Temp. unit
Password setting ( Management )
Back:
Filter sign
Select [°C] or [°F] with the [Cursor button (Up/Down)]
2
and press the [Enter button].
The screen returns to the "Initial" screen.
Temp. unit
Cancel:
Language

5-9. Zone user setting *

In "Submenu" screen, select [Zone user setting] with the [Cur-
sor button (Up/Down)], and press the [Enter button].
Submenu
2/2
Initial
Management
Zone user setting
Back:
Monitor
"Zone user setting" screen opens.
Zone user setting

Day/Night setting

Name setting
Back:
Management
En-29
Mo 10:00
English
°C
Setting:
Management
Mo 10:00
Temp. unit
c
°
OK:
Mo 10:00
Setting:
Mo 10:00
Setting:
Date and time
5-9-1. Day/Night setting
You can register zone(s) and room-temperature sensor to
each group of "Day" and "Night".
In "Zone user setting" screen, select [Day/Night setting]
1
with the [Cursor button (Up/Down)], and press the [Enter
button].
Zone user setting
Day/Night setting
Name setting
Back:
Management
"Day/Night setting" screen opens.
Day/Night setting
Day setting
Night setting
Back:
Select [Day setting] for the registration of group "Day",
2
and select [Night setting] for the registration of group
"Night", with the [Cursor button (Up/Down)]. When you
press the [Enter button], registerable zones and room-
temperature sensor are displayed.
As an setting example, Zone 1 to 8 are supposed to be
connected in "Day setting" screen in following instruc-
tions.
Setting procedures are common to [Day setting] and
[Night setting].
Day setting
Zone 1
Zone 3
Zone 5
Zone 7
Sensor
Back:
Mo 10:00
Setting:
Date and time
Mo 10:00
Setting:
Name setting
Mo 10:00
Zone 2
Zone 4
Zone 6
Zone 8
Indoor unit
Remove:
Night setting