Fujitsu ARTG30LHTA Operating Manual page 18

(2) Move the cursor between each pattern number with the
[Cursor button (Up/Down)], and press the [Cursor button
(Left/Right)] to set the time setting of On/Off timer, On/
Off, operating mode and temperature for each pattern.
Weekly timer setting
Su M
Weekly 1
1
Day
2
Time
3
End
4
Delete:Push for two seconds
Note
To delete the setting, move the cursor to the pattern
number, and press the [Cancel button] for 2 seconds.
(3) Adjust time setting of On/Off timer with the [Cursor but-
ton (Up/Down)].
Weekly timer setting
Su Mo
Weekly 1
1
Day
2
Time
3
End
4
Cancel:
(4) Select [On] (On timer) or [Off] (Off timer) with the [Cursor
button (Up/Down)]. When you selected [Off] (Off timer)
here, skip following step (5) and (6).
Weekly timer setting
Su Mo
Weekly 1
1
Day
2
Time
3
End
4
Cancel:
(5) When you selected [On] (On timer), select the operating
mode with the [Cursor button (Up/Down)].
Weekly timer setting
Su Mo
Weekly 1
1
Day
2
Time
3
End
4
Cancel:
En-17
Mo 10:00
o
OK:
Time 5-8
Mo 10:00
5 00
OK:
Time 5-8
Mo 10:00
5:00
On
OK:
Time 5-8
Mo 10:00
5:00 On Heat
° C
OK:
Time 5-8
(6) When you selected [On] (On timer), adjust the value to
the desired temperature with the [Cursor button (Up/
Down)].
Weekly timer setting
Su Mo
Weekly 1
Day 1
2
Time
3
End
4
Cancel:
Notes
•
When you set "On timer", you need to set both of the
operating mode and the temperature firmly.
Without these configurations, the timer will not work.
•
Possible temperature setting ranges in the operation
mode are as follows:
Cool, Dry, Auto ............... 18 to 30 °C (64 to 88 °F)
Heat ............................... 16 to 30 °C (60 to 88 °F)
•
If the temperature out of the Set temp. range limitation
is set, it will be reset at the nearest temperature within
the range. However, the adjusted temperature value
in this setting will not be corrected automatically.
(7) To complete the [Time] setting, press the [Enter button].
When setting the other days of the week continually,
perform procedures in step 4 and 5.
6. To finalize the setting you have set in step 5, select [End] with
the [Cursor button (Up/Down)] and press the [Enter button].
Weekly timer setting
Su Mo
Weekly 1
5:00
1
Day
10:00
2
Time
17:00
3
End
4
Back:
If you press the [Cancel button] before you finalize the set-
ting, following cancel confirmation screen is displayed.
Setting change will be canceled. OK?
No
Select [No] or [Yes] with the [Cursor button (Left/Right)], and
press the [Enter button].
If you select [Yes] and press the [Enter button] here, all the
configured items in step 5 will be canceled.
If you select [No] and press the [Enter button] here, the
"Weekly timer setting" screen is displayed. To finalize the
setting, select [End] with the [Cursor button (Up/Down)] and
press the [Enter button].
Mo 10:00
5:00 On Heat 20
° C
OK:
Time 5-8
Mo 10:00
On Heat 20
° C
Off
On Heat 23
° C
Setting:
Time 5-8
Yes