Foma Pc Setup Software - Foma P906i Instruction Manual

5
Select the text box for a Bluetooth pass key
1Enter the Bluetooth pass key1Set
≥You can enter 1 through 16 half-pitch alphanumeric characters for
the Bluetooth pass key.
≥Enter the same Bluetooth pass key for both the FOMA phone and
personal computer.
6
The personal computer is registered and a
wireless connection starts.
When the connection is completed, "
Information
≥You cannot place the devices using the Headset service or Hands-free
service in the state of "Accept registered" while the FOMA phone is in
the state of "Accept dialup devices".
≥When the personal computer found multiple devices for registering the
FOMA phone on the personal computer, identify the FOMA phone by the
device name. When the personal computer found multiple devices having
the same device names, identify the FOMA phone by the device address.
≥In the state of "Accept dialup devices", searches are made from all the
Bluetooth devices around, however, you cannot connect to any service
other than the Dial-up Communication service.
■To connect to the registered personal computer
When you connect to the FOMA phone from a registered personal
computer, place "Dial-up" in the state of "Accept registered". Then you
can make a connection from the personal computer to the FOMA phone
by operating from the personal computer. You can connect even in the
state of "Accept dialup devices".
Confirm the Modem
Before setting communication, confirm the name and
COM port number of the modem used for connecting the
dial-up service.
1
<For Windows XP>
"スタート (Start)"1Open "コントロールパネル
(Control panel)"1"パフォーマンスとメンテナ
ンス (Performance and maintenance)"
1Open "システム (System)".
<For Windows 2000>
"スタート (Start)"1"設定 (Setting)"
1Open "コントロールパネル (Control panel)"
1Open "システム (System)".
2
Click the "ハードウェア (Hardware)" tab
1
Click "デバイスマネージャ (Device manager)".
3
Click each device, then confirm the modem
name or COM port number.
The modem name or COM port number is displayed under "ポート
(COMとLPT) [Port (COM/LPT)]" and "モデム (Modem)".
To set an access point with the "FOMA PC setup software", see page 9.
To set an access point without the "FOMA PC setup software", see
page 20 or page 29.
You can close the Dial-up Communication service that is
connected.
1
2
(blue)" blinks.
3
To connect the FOMA phone to a personal computer
and perform the packet communication or 64K data
communication, you need to configure various settings
related to the communication. Using the "FOMA PC
setup software", you can easily carry out the settings
below. If required, you can set the packet
communication and 64K data communication without
using the "FOMA PC setup software". (See page 20 and
page 29)
8
Have Dial-up Communication Service
Closed
m1LifeKit1Bluetooth1Device list
Select the Bluetooth device that is connected.
Dial-up1YES
The Dial-up Communication service is closed.

FOMA PC Setup Software

■Easy setting
You can easily carry out "dial-up creation for FOMA data communication"
and "Communication setup optimization" by following the guidance.
■Communication setup optimization
Before using "FOMA packet communication", optimize communication
settings in your personal computer.
To maximize the communication performance, communication setup
optimization is needed.
■Access point name (APN) setting
You can set an access point name (APN) required for packet
communication.
The FOMA packet communication does not use an ordinary phone
number as an access point unlike the 64K data communication.
You need to register an access point name (APN) in the FOMA phone in
advance, and specify the registration number (cid) in the access point
number field for connection.
By the default, "mopera.ne.jp", the access point name (APN) of "mopera",
※
is registered in cid 1, and "mopera.net", that of "mopera U", is registered
※
in cid 3. To connect to another service provider or Intranet LAN,
however, you need to set the access point name (APN).
※"cid" is the abbreviation of "Context Identifier", the number for storing
the packet communication access point name (APN) to the FOMA
phone.
Information
≥If the old-version "W-TCP設定ソフト (W-TCP setup software)", the
old-version "FOMAデータ通信設定ソフト (FOMA data communication
setup software)" or the older version than this "FOMA PC設定ソフト
(FOMA PC setup software)" (older than version 4.0.0) is installed,
uninstall it in advance.