Preparation Flow For Data Transfer (Obex™ Communication) - Foma P906i Instruction Manual

Operating Environment
For the data communication, the following operating environment is
required for your personal computer:
■PC main unit
PC/AT compatible model
When using the FOMA USB Cable with Charge Function 01/02 (option):
USB port (Universal Serial Bus Specification Rev1.1 compliant)
When using Bluetooth communication:
Bluetooth Specification Ver. 1.1, Ver. 1.2, or Ver. 2.0+EDR compliant (Dial-up
Networking Profile)
Display resolution 800 x 600 dots, High Color 16 bits or more recommended.
■OS
Windows 2000, Windows XP, Windows Vista (Japanese version in each)
■Memory requirements
Windows 2000: 64 Mbytes or more
Windows XP: 128 Mbytes or more
Windows Vista: 512 Mbytes or more
■Hard disk space size
Unused memory space of 5 Mbytes or more
≥The operation on the upgraded OS is not guaranteed.
≥The memory requirements and hard disk space size may vary depending on the
system environment.
Necessary Devices
The following hardware and software programs are required besides the
FOMA phone and personal computer:
≥FOMA USB Cable with Charge Function 01/02 (option) or FOMA USB Cable (option)
≥Provided "FOMA P906i CD-ROM"
※For USB connection
Information
≥Use a dedicated "FOMA USB Cable with Charge Function 01/02" or "FOMA USB
Cable". The USB cable for personal computers cannot be used because the shape of
the connector differs.
≥If you use a USB hub, the devices may not work correctly.
468
Connect FOMA Phone to Other Devices
The following three ways are available for connecting the FOMA phone to another
device:
Use FOMA USB Cable with Charge Function 01/02
Connect the FOMA phone to a personal computer provided with the USB port
using the FOMA USB Cable with Charge Function 01/02 (option).
This way of connection applies to all types of communications such as packet
communication, 64K data communication, and data transfer.
≥Set "USB mode setting" to "Communication mode". (See page 363)
≥You need to install the "FOMA communication setup files" (driver) before use.
Use Bluetooth communication
Connect a Bluetooth communication compatible personal computer wirelessly to
the FOMA phone.This way of connection applies to packet communication and
64K data communication.
≥When you perform data communication by using Bluetooth function, the high speed
communication is applied to the FOMA phone. However, you may not be able to
communicate at the maximum speed because of the limit of communication speed of
Bluetooth function.
≥Use a Bluetooth linked standard modem or a Bluetooth modem provided by the
Bluetooth device maker. Contact the maker of your personal computer or Bluetooth
device maker for how to install and to set up.
Use Infrared Data Exchange
By using infrared rays, you can send/receive data between your FOMA phone and
another FOMA phone, mobile phone, or personal computer provided with the
infrared data exchange function. (See page 367)
This applies only to data transfer.
※
Preparation Flow for Data Transfer
(OBEX™ Communication)
When you use the FOMA USB Cable with Charge Function 01/02 (option),
install the "FOMA communication setup files" (driver).
Download and install the "FOMA communication setup files" (driver).
≥Install the FOMA communication setup files from the provided CD-ROM or download
them from the DoCoMo web page and install.
Data transfer