Preparation Flow For Data Transfer (Obex™ Communication); Preparation Flow For Data Communication - Foma P906i Instruction Manual

Necessary Devices
The following hardware and software are required
besides the FOMA phone and personal computer:
・FOMA USB Cable with Charge Function 01/02 (option)
or FOMA USB Cable (option)
・Provided "FOMA P906i CD-ROM"
※For USB connection
Information
≥Use a dedicated FOMA USB Cable with Charge Function 01/02 or
FOMA USB Cable. The USB cable for personal computers cannot be
used because the shape of the connector differs.
≥If you use a USB hub, the devices may not work correctly.
Connect FOMA phone to Other Devices
The following three ways are available for connecting
the FOMA phone to another device:
Use FOMA USB Cable with Charge Function 01/
02
Connect the FOMA phone to a personal computer
provided with the USB port using the FOMA USB Cable
with Charge Function 01/02 (option). (See page 4)
This way of connection applies to all types of
communications such as packet communication, 64K
data communication, and data transfer.
≥Set "USB mode setting" to "Communication mode" for data
communication.
Operate "m1Settings1Other settings1USB mode setting
1Communication mode".
≥You need to install the FOMA communication setup files (driver)
before use.
Use Bluetooth Communication
Connect a Bluetooth communication compatible
personal computer wirelessly to the FOMA phone.
(See page 7 or page 33)
This way of connection applies to packet
communication and 64K data communication.
≥When you perform data communication by using Bluetooth function,
the high speed communication is applied to the FOMA phone.
However, you may not be able to communicate at the maximum
speed, because of the limit of communication speed of Bluetooth
function.
≥Use a Bluetooth linked standard modem or a Bluetooth modem
provided by the Bluetooth device maker. Contact the maker of your
personal computer or Bluetooth device maker for how to install and
to set up.
Use Infrared Data Exchange
By using infrared rays, you can send/receive data
between your FOMA phone and another FOMA phone,
mobile phone, or personal computer provided with the
infrared data exchange function.
This applies to data transfer only.
※
Preparation Flow for Data Transfer
(OBEX™ Communication)
When you use the FOMA USB Cable with Charge Function
01/02 (option), install the FOMA communication setup files.
Download or install the "FOMA communication setup files" (driver).
(See page 4 and page 31)
・Install the FOMA communication setup files from the provided
CD-ROM, or download them from the DoCoMo web page and install.

Preparation Flow for Data Communication

The following outline shows a preparation flow for
packet communication or 64K data communication.
For USB connection
Connect a personal computer
to the FOMA phone using the
FOMA USB Cable with Charge
Function 01/02 (option).
Download or install the "FOMA
communication setup files"
(driver). (※2)
・Install the FOMA
communication setup files
from the provided CD-ROM, or
download them from the
DoCoMo web page and install.
Check the setting after
installation. (※3)
Install the "FOMA PC setup
software". (※5)
※1-7: Depending on the OS of the personal computer, the reference
page for the preparation differs.
OS of the personal
computer
※1
Windows XP/
P.7
Windows 2000
Windows Vista P.33
3
Data transfer
For Bluetooth connection
Connect a personal computer
wirelessly to the FOMA phone
using Bluetooth
communication. (※1)
Check the modem. (※4)
Carry out the setting manually
without using the "FOMA PC
setup software". (※6)
Connect. (※7)
Reference
※2 ※3 ※4 ※5 ※6
P.20
P.4 P.6 P.8 P.8
P.29
P.43
P.31 P.32 P.33 P.34
P.47
※7
P.16
P.28
P.41
P.46