Setting Connection Timeout; Changing A Host From I-Mode (Isp Connection Communication); Host Selection - Foma P906i Instruction Manual

Information
<Set image display>
≥Even when "ON" is set, images might not be displayed correctly. In this case, "
displayed.
≥When "OFF" is set, "
" is displayed and the data file is not received.
≥If you change this setting, "Set image display" of "User settings" of "1Seg" is also
changed.
<Use phone information>
≥The available information is as follows:
・Date and time set by "Set time"
・Reception level of radio waves
・Battery level
・Sound volume set by "Phone" of "Ring volume"
・Language selected by "Select language"
・Model name and serial number of FOMA phone
<Sound effect setting>
≥Even when "ON" is set, the effect tones may not sound depending on Flash movies.
<Set Connection Timeout>

Setting Connection Timeout

It may take long to obtain some sites. You can set the time to wait before
canceling obtaining. Obtaining is not canceled automatically when
"Unlimited" is set.
1
i1i-mode settings1Set connection timeout
1Select a timeout.
Information
≥Even when you have set "Unlimited", you may be disconnected owing to radio wave
conditions.
<Host Selection>
Changing a Host from i-mode
" is
(ISP Connection Communication)
※Normally, you do not need to change this setting.
You can set the host (APN) to use for receiving services other than
i-mode (DoCoMo).
If you change this setting, you will not be able to use i-mode.
1
i1i-mode settings1Host selection
1Highlight <Not recorded> and press l(
1Enter your Terminal Security Code.
≥If you select a stored host, the setting is changed to the selected one.
≥To delete the stored host, press i(
Security Code, and then select "YES".
2
Do the following operations.
Item
1Enter a host name.
Host name
≥You can enter up to 9 full-pitch/18 half-pitch characters.
1Enter a host number.
Host number
≥You can enter up to 99 half-pitch alphanumeric characters.
1Enter a host address.
Host address
≥You can enter up to 30 half-pitch alphanumeric characters.
1Enter a host address 2.
Host address 2
≥You can enter up to 30 half-pitch alphanumeric characters.
3
Press l(
), select "Delete", enter your Terminal
Operation/Explanation
).
m + 8 - 1 -
)
189