Setting Dial-Up Network - Foma P906i Instruction Manual

Setting Dial-up Network

Set Packet Communication
The operation below explains how to set a connection
for packet communication without using the "FOMA PC
setup software".
The packet communication uses AT commands to carry
out the settings from a personal computer. To specify
settings, communication software to enter AT command
is required. "Hyper Terminal", which is attached to
Windows as the standard software, is used here for
explanation.
When using DoCoMo Internet access service "mopera
U" or "mopera", you do not need to set an access point
name (APN) (see page 21).
You can set "caller ID notified/not notified" (see
page 23) as required. (You need to set "caller ID
notified" when using "mopera U" or "mopera".)
<Packet communication setting flow using AT commands>
Confirm the COM port number (See page 20)
Start the communication software that enables the entry of AT commands
(See step 3 of "Set an Access Point Name (APN)" on page 21)
Set an access point name (APN) (See step 7 on page 22)
Set "caller ID notified/not notified"
(See step 2 of "Set Caller ID Notified/Not Notified" on page 23)
Set others (See page 48)
Exit the communication software (See step 9 on page 22)
■AT commands
≥The AT commands are used to control a modem. The FOMA phone,
which conforms to the AT commands, supports some extended
commands and unique AT commands.
≥By entering AT commands, you can carry out detailed setting for packet
communication and FOMA phone, and confirm (display) the setting
contents.
≥If the entered AT command is not displayed, enter "ATE1
Confirm COM Port Number
To manually carry out the communication setting, you
need to specify a COM port number, which is assigned
to "FOMA P906i" (modem) embedded after you install
the "FOMA communication setup files" (driver).
The confirmation method varies depending on the
operating system of your personal computer.
≥When using DoCoMo Internet access service "mopera U" or
"mopera", you do not need to set an access point name (APN);
therefore, you do not need to confirm the modem.
For Windows XP
1 "スタート (Start)" 1Open "コントロールパネ
ル (Control panel)".
2
From "プリンタとその他のハードウェア
(Printer and the other hardware)" in "コント
ロールパネル (Control panel)", open "電話とモ
デムのオプション (Phone and modem
options)".
3
If the "所在地情報 (Address information)"
display appears, enter "市外局番/エリアコード
(City code/Area code)", then click "OK".
4
Open the "モデム (Modem)" tab, confirm the
COM port number in the "接続先 (Access
point)" field of "FOMA P906i", then click
"OK".
≥When connecting wirelessly using Bluetooth communication,
confirm the COM port number of the in-use Bluetooth linked
standard modem or Bluetooth modem provided by a Bluetooth
device maker in the "接続先 (Access point)" field.
≥The COM port number you confirmed is used to set an access
point name (APN) (see page 21).
≥The contents on the property display and COM port number vary
depending on the personal computer you use.
".
20