Result Codes - Foma P906i Instruction Manual

Table of Contents

Advertisement

Disconnection Reason List
■64K Data Communication
Value
1
The specified number does not exist.
16
The line was normally disconnected.
17
Cannot communicate because the other party is communicating.
18
Dialed but no response has come in within the specified duration.
19
Cannot communicate because the other party is dialing.
21
The other party rejected to receive the call.
63
The network service and options are not valid.
65
The specified transmission performance is not provided.
88
Dialed to or received the call from the phone with different properties.
■Packet Communication
Value
27
No APN was found; or an invalid APN was specified.
30
The line was disconnected from the network.
33
You have not applied for the service option you requested.
36
The line was normally disconnected.

Result Codes

■Result Code List
Numeric
Character
notation
notation
0
OK
1
CONNECT
2
RING
3
NO CARRIER
4
ERROR
6
NO DIALTONE
7
BUSY
8
NO ANSWER
100
RESTRICTION
101
DELAYED
■Extended Result Code List
For &E0
Connection speed between the FOMA phone and the base station is
displayed.
Numeric
Character
notation
notation
121
CONNECT 32000
122
CONNECT 64000
125
CONNECT 384000
133
CONNECT 3648000
For &E1
Numeric
Character
notation
notation
5
CONNECT 1200
10
CONNECT 2400
11
CONNECT 4800
13
CONNECT 7200
12
CONNECT 9600
15
CONNECT 14400
16
CONNECT 19200
17
CONNECT 38400
18
CONNECT 57600
19
CONNECT 115200
20
CONNECT 230400
21
CONNECT 460800
Reason
Reason
Meaning
Processing has been executed
normally.
The line has been connected to the
other party.
An incoming call has arrived.
The line has been disconnected.
The system can receive no
command.
The system can detect no dial tone.
The system is detecting the busy tone.
The connection completed; timeout
The network is restricted.
Within restricted redialing time
Connection speed
32,000bps
64,000bps
384,000bps
3,648,000bps
Connection speed
1,200bps
2,400bps
4,800bps
7,200bps
9,600bps
14,400bps
19,200bps
38,400bps
57,600bps
115,200bps
230,400bps
460,800bps
Information
≥Result codes are displayed in the character notation (default) when the
ATVn command (see page 54) is set to n=1 and displayed in the
numeric notation when it is set to n=0.
≥The baud rate is displayed to keep the compatibility with a conventional
modem connected via RS-232C. However, the FOMA phone and
personal computer are connected via the FOMA USB Cable with
Charge Function 01/02 (option) or Bluetooth communication; so, the
baud rate is different from the actual connection speed.
≥"RESTRICTION" (numeric notation: 100) means that the
communication network is congested. If this result code appears, wait
for a while, then connect the line again.
■Communication Protocol Result Code List
Numeric
Character notation
notation
1
PPPoverUD
2
AV32K
3
AV64K
5
PACKET
■Result Code Display Examples
≥When ATX0 is set:
CONNECT only appears at completion of the connection, regardless of
the contents specified in the AT¥V command (see page 55).
Example in character notation: ATD¢99¢¢¢1#
Example in numeric notation:
≥When ATX1 is set
:
・ If ATX1 and AT¥V0 are set (default):
A result code appears in the following format at completion of the
connection: CONNECT<baud rate between the FOMA phone and PC>
Example in character notation: ATD¢99¢¢¢1#
Example in numeric notation:
・ If ATX1 and AT¥V1 are set
A result code appears in the following format at completion of the 
connection: CONNECT<baud rate between the FOMA phone and 
PC>PACKET<access point name (APN)>/<maximum baud rate for
upload (the FOMA phone → wireless base station)>/<maximum 
baud rate for download (the FOMA phone ← wireless base station)>
Example in character notation: ATD¢99¢¢¢1#
Example in numeric notation: ATD¢99¢¢¢1#
※If you specify ATX1 and AT¥V1 at the same time, you may not be
able to correctly carry out the dial-up connection.
You are advised to use only AT¥V0.
57
Meaning
Connected by 64K data
communication
Connected by 32K
videophone
Connected by 64K
videophone
Connected by packet
communication
CONNECT
ATD¢99¢¢¢1#
1
CONNECT 460800
ATD¢99¢¢¢1#
1 21
:
CONNECT 460800 PACKET
mopera.ne.jp /384/3648
(Indicates that the FOMA phone
connected to mopera.ne.jp at
maximum 384 kbps for upload and
maximum 3648 kbps for download.)
1215
April '08 (Ver.1.0)
F0308F0

Advertisement

Table of Contents
loading

Related Products for Foma P906i

Table of Contents