Preparing Bluetooth Communication - Foma P906i Instruction Manual

< Dial-up Communication Service

Preparing Bluetooth Communication

You can make data communication by connecting a
Bluetooth communication compatible personal
computer wirelessly to your FOMA phone.
Connect to Personal Computer for the
First Time
To connect a personal computer to the FOMA phone for
the first time, register the personal computer to the
FOMA phone.
m1LifeKit1Bluetooth
1
1Accept dialup devices
2
Enter your Terminal Security Code.
O o (
≥To cancel, press
made for five minutes in standby, the connection is automatically
released.
≥During standby, "
(blue)" lights.
3
Search and register the Bluetooth device from
the personal computer.
≥Register the device from the personal computer while the FOMA
phone is in standby.
≥Refer to the operating manual of your personal computer for the
details of how to operate it.
(Depending on the personal computer you use, "探索 (search)" or "
サーチ (search)" is used instead of "検索 (search)", and "ペアリン
グ (pairing)" is used instead of "機器登録 (register devices)".
4
When the display for connection request
appears, select "YES".
.
5
Select the text box for a Bluetooth pass key
1Enter the Bluetooth pass key1Set
≥You can enter 1 through 16 half-pitch alphanumeric characters for
the Bluetooth pass key.
≥Enter the same Bluetooth pass key for both the FOMA phone and
personal computer.
6
The personal computer is registered and a
wireless connection starts.
When the connection is completed, "
>
) in standby. When no connection is
(blue)" blinks.
Information
≥You cannot place the devices using the Headset service or Hands-free
service in the state of "Accept registered" while the FOMA phone is in
the state of "Accept dialup devices".
≥When the personal computer found multiple devices for registering the
FOMA phone on the personal computer, identify the FOMA phone by the
device name. When the personal computer found multiple devices having
the same device names, identify the FOMA phone by the device address.
≥In the state of "Accept dialup devices", searches are made from all the
Bluetooth devices around, however, you cannot connect to any service
other than the Dial-up Communication service.
■To connect to the registered personal computer
When you connect to the FOMA phone from a registered personal
computer, place "Dial-up" in the state of "Accept registered". Then you
can make a connection from the personal computer to the FOMA phone
by operating from the personal computer. You can connect even in the
state of "Accept dialup devices".
Confirm the Modem
Before setting communication, confirm the name and
COM port number of the modem used for connecting the
dial-up service.
1
" [スタート (Start)]"1Open "コントロー
ルパネル (Control panel)"1"システムとメンテ
ナンス (System and maintenance)"
2
Open "ハードウェアとデバイスを表示 (Show
hardwares and devices)"
1Click "続行 (Continue)".
3
Click each device, then confirm the modem
name or COM port number.
The modem name or COM port number is displayed under "ポート
(COMとLPT) [Port (COM/LPT)]" and "モデム (Modem)".
To set an access point with the "FOMA PC setup software", see page 35.
To set an access point without the "FOMA PC setup software", see
page 43 or page 47.
Have Dial-up Communication Service
Closed
You can close the Dial-up Communication service that is
connected.
m1LifeKit1Bluetooth1Device list
1
2
Select the Bluetooth device that is connected.
3
Dial-up1YES
The Dial-up Communication service is closed.
33