Using Bar Code Reader - Foma P906i Instruction Manual

Information
≥You cannot use Auto Timer in "Manual" of Continuous Mode.
≥Auto Timer is set to "OFF" when shooting ends.
<Bar Code Reader>

Using Bar Code Reader

You can use the outside camera to scan JAN codes and QR codes and
store them as data.
From the scanned data, you can make calls, compose i-mode mail
messages, and access Internet web pages, and so on.
■When scanning with Bar Code Reader
≥Take the character strings as large as
possible within the guide frame.
≥Autofocus works when you scan a
code about 10 cm or more away from
it. When you scan a code in the
out-of-focus state, the recognition
rate lowers.
≥Scan so that the camera is in parallel
with the code.
■JAN Code
JAN Code is a bar code that denotes numerals with
the vertical bars of a different width.
You can scan 8-digit (JAN8) and 13-digit (JAN13)
JAN codes.
≥"4942857112597" is displayed when you scan this bar
code with the FOMA phone.
■QR Code
QR Code is one of the 2-dimensional codes that denotes data in
the vertical and horizontal directions.
Kanji, katakana, alphanumeric characters, and pictographs are
displayed when you scan it. Some QR codes have image or
melody information.
≥"株式会社NTTドコモ (NTT DoCoMo, Inc.)" is displayed when you
scan this QR code with the FOMA phone.
Scan a Code
At Bar Code Reader
You can store up to 5 scanned codes.
You can scan up to 16 divided QR codes.
1
2
Guide frame
Brightness: ±0
start-up Zoom: Magnified view
m1LifeKit1Bar code reader1Scan code
The Bar Code Reader menu is displayed.
≥You can paste the Bar Code Reader menu to the desktop. (See page 127)
Fit a code to be scanned to the guide
o . X
frame and press
When the focus is locked, a confirmation tone sounds
and the cross mark becomes green.
≥Press i(
) and select "Brightness"; then you
can adjust brightness to -3 (dark) through +3 (bright).
≥Press
o to show the reduced display, and press C
to return to the former display.
o V
Scanning Code
display
165