Setting A Carrier To Preferentially Connect To; Plmn Setting; Displaying A Carrier On The Stand-By Display; Operator Name Display - Foma P906i Instruction Manual

<PLMN Setting>
Setting a Carrier to Preferentially Connect
to
You can specify the priority order of carriers you are connected to for
when "Network search mode" is set to "Auto". You can store up to 20
carriers.
1 m1Settings1Network setting1Int'l roaming

1PLMN setting

≥You can select the stored carrier to check the stored contents.
2
i(
)1PLMN list select
≥To search for a carrier by a name of country/area, press l(
country/area name. You can search also by pressing l(
Country/Area list and entering a country/area name.
3
o (
Select a carrier1O
1l(
)1YES
Function Menu while PLMN Setting is Displayed
Function menu
Set VPLMN to You can store the carrier you are currently connected to.
1l(
UPLMN )1YES
PLMN list select See "Setting a Carrier to Preferentially Connect to" on page 478.
PLMN manual You can store a carrier by entering a country/area code and
select operator code. You can store carriers not found in the list.
1Enter a country/area code (3 digits) and operator code (2
to 3 digits)1Select a network type1l(
1Select a number to change to1l(
Change priority
1YES1l(
Delete this
1YES1l(
Delete all
478
) and select a
) again from the
)1Select a network type
Operation/Explanation
)1YES
) 1YES
)1YES
)1YES
Information
≥When the "DoCoMo" network is available, you are preferentially connected to it
regardless of this setting.
≥This setting is stored on the UIM.
≥You cannot set this function if the UIM is not inserted.
<Operator Name Display>
Displaying a Carrier on the Stand-by
Display
You can select whether to display, on the Stand-by display, the carrier
you are currently connected to.
1 m1Settings1Network setting1Int'l roaming
1Operator name disp.1Display ON or Display OFF
When you set to "Display ON"
The carrier's name is displayed on the Stand-by display.
However, when you use the "DoCoMo" network, the carrier is
not displayed.
<Status in the Area>

Confirming a Communication System

You can display whether the carrier you are currently connecting to
supports the circuit switching (CS)
※1 The communication system used for voice calls, videophone calls, SMS, etc.
※2 The communication system used for i-mode, i-mode mail, etc.
1
m1Settings1Network setting1Status in the area
Carrier's name
※1 ※2
and packet switching (PS) .