Carrying Out Set Communication - Foma P906i Instruction Manual

8
Confirm the set information, then click "完了
(Complete)".
The set contents are listed on the display. Confirm that there is no
problem on the set contents, then click "完了 (Complete)".
≥To change the set contents, click "戻る (Back)".
≥If "デスクトップにダイヤルアップのショートカットを作成する
(Create a dial-up shortcut on the desktop)" is checked, a dial-up
shortcut will be created on the desktop.
9
Click "OK".
The setting is completed.
Open the dial-up shortcut icon automatically created
on the desktop; then the connection display for
starting communications appears. After confirming that the
connection starts, you can start the Internet browser or mail browser
for communication. (See page 16)

Carrying Out Set Communication

The operation below explains how to make a dial-up
connection using Windows XP as an example. Perform
the operation on page 4 to connect the FOMA phone to
your personal computer.
1
Double-click the dial-up shortcut
icon on the desktop.
Open the FOMA connection shortcut icon created at
communication setting; the connection display for
starting communication appears.
≥Bring up the icon by the following operations if it is not displayed:
<For Windows XP>
"スタート (Start)"→"すべてのプログラム (All programs)"→"アク
セサリ (Accessories)"→"通信 (Communications)"→"ネットワー
ク接続 (Network connection)"
<For Windows 2000>
"スタート (Start)"→"プログラム (Program)"→"アクセサリ
(Accessories)"→"通信 (Communications)"→"ネットワークとダイ
ヤルアップ接続 (Network and dial-up connections)"
2
Enter "ユーザー名 (User name)" and "パスワー
ド (Password)", then click "ダイヤル (Dial)".
≥For "mopera U" or "mopera", you can connect even if the "ユーザー
名 (User name)" and "パスワード (Password)" fields are blank.
≥When you put a check mark for "次のユーザーが接続するとき使用す
るために、このユーザー名とパスワードを保存する (Save this user
name and the password for the next user to use for connecting)", this
user or all users do not need to enter them from the next time.
3
Click the dial-up icon on
the task tray to check for
the connection.
≥You can start the browser software to browse web pages, use
e-mail, and so on.
Information
≥Use the FOMA phone with the dial-up setting completed for dial-up
connection. To connect another FOMA phone, you may need to
reinstall the FOMA communication setup files (driver).
≥The power consumption of the FOMA phone increases during
communication.
≥During packet communication, the communication state appears on the
FOMA phone.
" " (Communicating, data sending)
" " (Communicating, data receiving)
" " (Communicating, no data sending/receiving)
" " (Outgoing or being disconnected)
" " (Incoming or being disconnected)
≥During 64K data communication, "
Disconnecting
1
Click the dial-up icon on
the task tray.
2
Click "切断 (Disconnect)".
Information
≥The communication line may not be disconnected by only exiting the
browser software. To surely disconnect the communication line,
perform this operation.
≥The baud rate displayed on your personal computer may be different
from the actual one.
16
" appears on the FOMA phone.