Setting Image Size And Image Quality - Foma P906i Instruction Manual

■Inside camera
Camera mode Size
VGA (640 x 480)
CIF (352 x 288)
Photo/
QVGA (240 x 320)
Continuous
QCIF (176 x 144)
Sub-QCIF (128 x 96)
VGA (640 x 480)
HVGA Wide (640 x 352)
Movie QVGA (320 x 240)
QCIF (176 x 144)
Sub-QCIF (128 x 96)
1
o to adjust the magnification. N
Finder display1Use
Information
≥The image quality may slightly change when you select "Wide" or "Tele".
≥"Tele" is released in the following cases:
・When you press h to end the camera -
・When a size is changed
・When camera mode is switched
Use Focus Function
You can shoot with the outside camera which focuses on a subject.
≥When "Focus" is set to "Face detection", faces are detected in the first place. When a
face is detected, the yellow frame is shown. Up to five faces are detected, and the
image is shot with a single face of those faces focused automatically according to the
face size and position. When multiple faces of people are found, the frame for a face to
be focused becomes yellow. When the detection fails, Autofocus works and then the
image is shot.
≥Autofocus works when you shoot a object about 10 cm or more away from it.
1
o
Finder display1X
When a subject is focused, a confirmation tone sounds, the frame becomes green,
and the focus is locked.
When the subject is not focused, the frame becomes red.
≥Press r to focus again.
160
The maximum
Level of zoom magnifications
(Approx.)
1 level 1.0 times
11 levels 1.6 times
11 levels 1.5 times
31 levels 3.3 times
31 levels 5.0 times
1 level 1.0 times
1 level 1.0 times
21 levels 2.0 times
31 levels 3.3 times
31 levels 5.0 times
Information
≥If "Movie type set" is set to "Voice" in Movie Mode, you cannot use Autofocus.
≥"Face detection" is available only in Photo Mode.
≥When "Face detection" is set, you cannot paste a cushy mark to the image.
≥Even when "Focus" is set to "Face detection", you might not be able to detect the face
in the following cases:
・When the face faces sideway or askew
・When the face is at a slant
・When part of the face is covered by glasses, a cap, or shadows
・When the face is extremely small, large, or dim when compared to overall screen
size
・When the face is placed at the edges of the display
≥The distance that faces can be detected by "Face detection" is within 2.5 m.

Setting Image Size and Image Quality

Function Menu of the Finder Display
Function menu
Inside camera/ You can switch between the inside camera and outside camera.
Outside camera
CHG camera-mode 1Select a mode.
≥When you select "Continuous mode", the camera starts in the
mode you used last time, "Auto", "Manual", or "Auto bracket".
1Select an image size.
Image size
≥When you shoot a photo for sending during a voice call, you can
select only "QCIF (176 x 144)" and "Sub-QCIF (128 x 96)".
1Select an item.
File size setting
[Movie Mode only] Mail restrict'n (S). . . You can shoot up to 500 Kbytes.
Mail restrict'n (L). . . You can shoot up to 2 Mbytes.
Long time. . . . . . . . . You can shoot for a long time. The moving
Image quality You can set the image quality for saving.
1Select an image quality.
Operation/Explanation
image is saved to the microSD card.