For Using Windows Xp/Windows 2000; Installing Foma Communication Setup Files (Driver) - Foma P906i Instruction Manual

■Provided "FOMA P906i CD-ROM"
When connecting the FOMA phone to your personal computer via the
FOMA USB Cable with Charge Function 01/02 for packet
communication, install the "FOMA communication setup files" (driver)
from the provided "FOMA P906i CD-ROM" onto the personal computer.
You are advised to install "FOMA PC setup software" for establishing the
APN or dial-up setting easily when you communicate.
Connect the FOMA Phone to a PC
The following steps explain how to connect the FOMA
USB Cable with Charge Function 01/02 (option).
1
Check the direction of the connector terminal
of the FOMA phone, then straight insert the
external connector of the FOMA USB Cable
with Charge Function 01/02 until it clicks.
2
Connect the USB connector of the FOMA USB
Cable with Charge Function 01/02 to the USB
terminal of the personal computer.
Connector terminal
External connector
(Face up "DoCoMo" logo
of the connector for
insertion)
Personal
computer
USB terminal
Information
≥Do not forcibly insert the FOMA USB Cable with Charge Function 01/
02. Malfunction may result. Insert each connector in the correct
direction at the correct angle; otherwise, you will fail connection. When
the direction and angle are correct, you can insert a connector
smoothly without the strong force. If you fail to insert a connector, check
its shape and direction once more without inserting a connector
forcibly.
≥Use a dedicated FOMA USB Cable with Charge Function 01/02. (The
USB cable for personal computers cannot be used because the shape
of the connector differs.)
≥Symbol "
" appears on the FOMA phone when the FOMA phone
recognizes the connection with the personal computer after you install
the FOMA communication setup files (driver) for packet communication
or 64K data communication. Before you install the FOMA
communication setup files (driver), the FOMA phone does not
recognize the connection with the personal computer, and symbol "
does not appear.
FOMA phone
USB connector
FOMA USB Cable with
Charge Function 01/02
"
■Removing
1. While holding down the release buttons of the external connector
of the FOMA USB Cable with Charge Function 01/02, straight pull
out the connector.
2. Pull out the FOMA USB Cable with Charge Function 01/02 from
the USB terminal of the personal computer.
Release button
Information
≥Do not disconnect the FOMA USB Cable with Charge Function 01/02
forcibly. Malfunction may result.
≥Do not disconnect the FOMA USB Cable with Charge Function 01/02
during data communication. Erroneous operation or malfunction of
the personal computer or FOMA phone, or loss of data could result.
≥Do not connect/disconnect the FOMA USB Cable with Charge
Function 01/02 in succession. Once you connect the cable, wait for a
while, then disconnect it and vice versa.
For Using
Windows XP/
Windows 2000
Installing FOMA Communication Setup
Files (Driver)
Installing the FOMA communication setup files (driver)
is required when you connect the FOMA phone to your
personal computer via the FOMA USB Cable with
Charge Function 01/02 (option) for the first time.
≥When connecting wirelessly using Bluetooth communication, you do
not need to install the FOMA communication setup files (driver).
≥Operate as the user who has the PC administrator right.
For Windows XP
1
Connect the FOMA phone and the FOMA USB
Cable with Charge Function 01/02. (See
page 4)
2
Start Windows, then set the provided "FOMA
P906i CD-ROM" into the personal computer.
4
Release button