Making Dial-Up Connection - Foma P906i Instruction Manual

20
Click the "全般 (General)" tab to confirm the
setting contents.
≥When two or more modems are connected to your personal
computer, confirm that "モデム (Modem) - FOMA P906i" or "モデ
ム (Modem) - the name of the in-use Bluetooth linked standard
modem or Bluetooth modem provided by a Bluetooth device
maker" is checked in the "接続方法 (Connection method)" field. If it
is not checked, check it.
≥Confirm that "ダイヤル情報を使う (Use dial information)" is
unchecked. If it is checked, uncheck it.
≥The COM port number allocated to "FOMA P906i" or "the in-use
Bluetooth linked standard modem or Bluetooth modem provided
by a Bluetooth device maker" varies depending on the personal
computer you use.
≥When connecting to "mopera U", enter "¢99¢¢¢3#" as the
access point number.
See page 22 for access point numbers other than "mopera U".
21
Click the "ネットワーク (Network)" tab, then
carry out respective settings.
In the "呼び出すダイヤルアップサーバーの種類 (Type of calling
dial-up server)" field, select "PPP: Windows 95/98/NT4/2000,
Internet".
For the component, check only "インターネットプロトコル (TCP/
IP) [Internet protocol (TCP/IP)]".
Then click "設定 (Setting)".
22
Uncheck all the items, then click "OK".
23
Return to the display in step 21, then click
"OK".

Making Dial-up Connection

The operation below explains how to make a dial-up
connection using Windows XP as an example. Perform
the operation on page 4 to connect the FOMA phone to
your personal computer.
≥To perform a connection via packet communication, it is
recommended that you optimize the communication performance by
"Communication Setup Optimization" on page 18. By optimizing
data, you can maximize the high-speed communication capability in
the FOMA network. To execute the optimization, install "FOMA PC
setup software" (see page 8).
≥When you perform 64K data communication, do not optimize the
communication performance by "Communication setup optimization".
1
"スタート (Start)"1"すべてのプログラム (All
programs)"1"アクセサリ (Accessories)"
1"通信 (Communications)"1Open "ネット
ワーク接続 (Network connection)".
2
Open the access point to be used.
Select the access point icon of the ISP name (see page 24) you
specified in "Set Dial-up Network", then "ネットワークタスク
(Network task)"→"この接続を開始する (Start this connection)".
Otherwise, double-click the access point icon.
3
Confirm the contents and click "ダイヤル (Dial)".
≥When connecting to "mopera U" or "mopera", you can leave the
user name and password fields blank.
4
The display appears to indicate the
connecting state.
In this period, the system performs logon processing to confirm the
user name and password.
28