Bluetooth Settings - Foma P906i Instruction Manual

Bluetooth Settings

1 m1LifeKit1Bluetooth1Bluetooth settings
1Do the following operations.
≥You cannot operate during a call or data communication.
Item
Set authentications You can set whether to set authentication when sending a
Phonebook entry via a Bluetooth device. If you set to "ON", set
whether to encrypt the data.
1ON or OFF1ON or OFF
Session number You can set whether to enter the password for sending all
setting Phonebook entries.
1ON or OFF
Time-out to search You can set the time for searching for Bluetooth communication
compatible devices around the FOMA phone.
1Enter a device search time (seconds).
≥Enter two-digit numerals as in "05" through "20".
Forward ring tone You can set whether to send a ring tone for the voice call and
videophone call to the connected Headset or Hands-free device.
When the device is specified as "Preferred device", connection is
made to send the ring tone even if the device is on standby.
1ON or OFF
Disconnection You can select whether to end talking or continue talking on the
settings FOMA phone when Bluetooth communication is disconnected
while talking through the Headset or Hands-free device.
1End the call or Continue on the phone
Dial from headset You can set whether to make a call by pressing the switch on the
Headset.
1Valid or Invalid
432
Operation/Explanation
Item
Bluetooth info You can display the device name, Bluetooth address, device
class, and supported profiles of Bluetooth function mounted on
the FOMA phone. You can change the device name.
≥To change the device name, press l(
device name. You can enter up to 16 full-pitch/32 half-pitch
characters.
Information
<Set authentications>
≥While a Bluetooth device to which Phonebook entries are sent is connected using a
service other than Object Push, the Phonebook entries are sent with authentication
and with encryption regardless of this setting.
≥You cannot set this function while a Bluetooth device is connected or on standby for
connection.
<Forward ring tone>
≥You cannot set this function while a Bluetooth device using the Headset service or
Hands-free service is connected or on standby.
<Bluetooth info>
≥If you select a pictograph for the device name, it might not be correctly displayed
depending on the destination Bluetooth device.
<Reset Settings>
Resetting Function Settings
You can reset the items indicated by
default. (See page 482)
1
m1Settings1Other settings1Reset settings
1Enter your Terminal Security Code1YES
Information
≥You cannot execute "Reset settings" while a Bluetooth device is connected or on
standby for connection.
≥You cannot execute "Reset settings" during IC Card Lock while "PIM/IC security
mode" is set to "Face reader" or "Double security".
Operation/Explanation
), enter the
m + 2 - 3 -
of "Function List" to their