About Ic Communication; Sending/Receiving One Data File; Sending/Receiving All Data Files - Foma P906i Instruction Manual

<iC Transmission>

About iC Communication

iC communication is the function that enables you to send/receive data
files to/from another FOMA phone using the FeliCa reader/writer
function. You can send/receive data files by overlapping the FeliCa "
mark of your FOMA phone with that of another FOMA phone supporting
the iC communication function.
≥The type of files and conditions of forwarding are the same as those of infrared data
exchange. (See page 368) However, you cannot send multiple files at a time.
≥You cannot execute iC communication while "IC card lock" is activated.
≥You might have difficulty in sending or receiving files depending on the destination
FOMA phone. In that case, move a FeliCa mark "
FeliCa mark or move each side up, down, left, or right.

Sending/Receiving One Data File

You can send/receive the data files one by one using iC communication.
≥See "■Notes on sending/receiving" on page 370 as well.
Send One Data File
≥You cannot use this function during charging.
1
Display of the data file to be sent1i(
1
transmission
≥To send a Phonebook entry, select "
and select "Send phonebook".
≥To send a mail message, ToruCa file or bookmark, select "Ir/
from the Function menu and select "
372
" close to or away from the other
Overlap one another's
FeliCa mark " ".
)
transmission" from the Function menu
transmission"
transmission".
2
YES
Receive One Data File
≥You cannot use this function during Multitask.
"
1
Overlap the FeliCa mark "
that of your FOMA phone while the Stand-by display is
shown1YES
≥When you receive a Phonebook entry in which a phone number is stored, the
confirmation display appears asking whether to store it also in the PushTalk
Phonebook.

Sending/Receiving All Data Files

You can send/receive the following data files all at once using iC
communication: Phonebook entries, schedule events, ToDo items, text
memos, bookmarks, mail messages, ToruCa files, and LCS client
information.
To send all data files, enter a session number (any four-digit number).
The receiving end needs to enter the same session number.
≥See "■Notes on sending/receiving all data files" on page 370 as well.
Send All Data Files
≥You cannot use this function during charging.
1
Display of the data file to be sent1i(
1All
transmission
1Enter your Terminal Security Code.
≥To send the Phonebook entries, select "
menu and select "Send all phonebook".
≥To send mail messages, ToruCa files or bookmarks, select "Ir/
from the Function menu and select "All
2
Enter the session number1YES
≥Enter any four-digit number as the session number.
" at the sending end with
)
transmission" from the Function
transmission"
transmission".