Storing In Pushtalk Phonebook; Store In Pushtalk Phonebook - Foma P906i Instruction Manual

3
Press h to end the communication after talking.
A tone for confirming the end of communication sounds at the other end.
≥When the call you received is a group call, the PushTalk communication itself
continues even if you press h, and the icon indicating that you are not
participating appears on each member's display and a confirmation tone sounds.
However, when all the members exit, the PushTalk communication itself ends.
Information
≥The talker is charged a communication fee from when he/she presses
talker's right obtained tone sounds.
≥The duration you can talk per talker's right is limited. The talker's right release notice
tone sounds before the limited time arrives, and the talker's right is released. In
addition, the PushTalk communication itself ends when no one gets the talker's right
in a certain period of time.
≥Just after purchase, Hands-free is automatically activated by "Hands-free w/
PushTalk". (See page 88) However, Hands-free is deactivated during Manner Mode
regardless of "Hands-free w/ PushTalk".
≥The FOMA phone works according to "Setting when closed" if you close it during
communication. You can set also by pressing
closed". (See page 67)
≥You cannot use "On hold" or "Holding" function for PushTalk.
≥A PushTalk call that comes in during a voice call, a PushTalk call that comes in during
Public Mode (Drive Mode), and a voice call (when "PushTalk arrival act" is set to other
than "Answer"), a videophone call, data communication, or a PushTalk call that
comes in during PushTalk communication are recorded as missed calls in Received
Calls.
≥A PushTalk call that comes in during a videophone call or during data communication
does not work and is not recorded in Received Calls.
≥After you finish PushTalk communication or when you cannot answer to a PushTalk
call, you can use a received call record to make a PushTalk call and to re-participate
or participate midway in the communication so long as the PushTalk communication
continues among other members. If the PushTalk communication among other
members has already been finished, your call is dialed as a new PushTalk call.
≥When a caller adds members during PushTalk communication, the added members
are not stored in Received Calls.
≥See page 89 for how to respond to the PushTalk call during i-mode communication.
≥When the caller is defined as the one to be rejected, the call is rejected. The setting of
call rejection applies to the setting for both voice calls and videophone calls.
p and the .
i ( +
) and selecting "Set. when
Information
≥When a PushTalk call comes in during Lock All or Omakase Lock, "
after the lock is released.
<Store in PushTalk Phonebook>

Storing in PushTalk Phonebook

From the items stored in a FOMA phone's Phonebook entry, you need to
store a name (reading) and a phone number in the PushTalk Phonebook.
You can store up to 1,000 entries in the PushTalk Phonebook.
1
p1m(
)
1Do the following operations.
≥You can store also by selecting <New>.
≥If you store multiple phone numbers from a Phonebook
entry, the phone number previously stored in the
PushTalk Phonebook is overwritten.
≥You cannot show the PushTalk Phonebook list even by pressing p from the
horizontal Stand-by display.
Item
View phonebook You can access an entry already stored in the FOMA phone's
Phonebook and store it in the PushTalk Phonebook.
1Call up a Phonebook entry1Select a phone number1YES
Direct input You can store the entry in the PushTalk Phonebook after storing it
in the FOMA phone's Phonebook.
1Phone1Select a storing method.
New . . . Go to step 2 on page 92.
Add . . . Go to step 3 of "Storing Displayed Phone Number/Mail
Address in Phonebook" on page 97.
≥When multiple phone numbers are stored in a Phonebook
entry, press l(
want to store in the PushTalk Phonebook. The "★" mark is
added to the phone number that has already been stored in the
PushTalk Phonebook.
" appears
PushTalk
Phonebook list
Operation/Explanation
) and select the phone number you
85