Advertisement
Example
For Windows XP
1
スタート
Click
(Start),
ル
(Control Panel), the
メンテナンス
(Performance and
maintenance) icon and the
(System) icon
システムのプロパティ
The
screen appears.
■
For Windows 2000, Me, 98:
a Click
スタート
ロールパネル
b Double-click the
ハードウェア
2
Click the
デバイスマネージャ
デバイスマネージャ
The
■
For Windows Me, 98: Click the
ネージャ
tab
3
Double-click a type of each device
Check the name of the installed device
Check that all the names of installed devices are
shown.
Device type
USB (Universal Serial
Bus) Controller
Port (COM and LPT)
or (COM/LPT)
Modem
*1 Displayed only under Windows Me and 98.
*2 "x" of COMx varies by PC to be used.
Uninstalling the communication configuration file
Before operation, read "Before installation/
uninstallation" ☛P3
Before uninstalling, make sure that FOMA terminal is
removed from the PC.
Example
For Windows XP
スタート
コントロールパネル
1
Click
,
プログラムの追加と削除
and the
delete Programs) icon
プログラムの追加と削除
The
■
For Windows 2000, Me, 98:
a Click
スタート
ネル
コントロールパネ
パフォーマンスと
システム
(System properties)
設定
コント
,
(Setting) and
システム
icon
(Hardware) tab
(Device manager)
screen appears.
デバイスマ
z
Device name
･
FOMA D902iS
･
FOMA D902iS Command*
･
1
FOMA D902iS Modem*
･
1
FOMA D902iS OBEX*
･
FOMA D902iS
2
Command Port (COMx)*
･
FOMA D902iS OBEX Port
2
(COMx)*
FOMA D902iS
(Add/
screen appears.
設定
コントロールパ
,
and
b Double-click the
と削除
2
Select FOMA D902iS USB
と削除
(Update/delete)
･
For Windows Me or 98, click
delete).
3
Check the name of program and click
(Yes)
The uninstall process of the configuration
software starts.
4
Click OK
z
INFORMATION
● When the installation fails or FOMA D902iS USB is
not displayed on the screen of Step 1, insert the
attached CD-ROM into the PC, click
ル
ソフトウェアのセットアップ
on the
uninstall the communication configuration file.
● When the communication configuration file is
uninstalled and immediately reinstalled under
Windows Me or 98, data communication may not be
successful depending on the PC environment. In
this case, the FOMA USB cable (optional) should be
removed and reinserted before re-attempting data
communication.
1
Communicating using the FOMA PC
configuration software
A number of settings are required when FOMA
terminal is connected to a PC to perform packet
communication or 64K data communication. The
FOMA PC configuration software allows you to
easily perform the following settings:
■ Easy setup
Creating a dialup connection for FOMA data
communication and W-TCP setup can be
performed automatically by following the
instructions in the guide.
■ W-TCP setup
This function optimizes the settings in the PC
required for FOMA packet communication.
Optimization of the communication settings using
W-TCP setup is required to enable
communication capability to maximum extent.
5
アプリケーションの追加
(Add/delete applications) icon
z
Click
追加と削除
通信設定ファイ
screen and
Next
変更
(Add/
はい
Advertisement
