Using Infrared Remote-Controller Function; Communication Setting - Foma P906i Instruction Manual

Send All Data Files
1
Display of the data file to be sent1i(
1Send all Ir data1Enter your Terminal Security Code.
≥To send the Phonebook entries, select "Send Ir data" from the Function menu
and select "Send all phonebook".
≥To send mail messages, ToruCa files or bookmarks, select "Ir/
from the Function menu and select "Send all Ir data".
2
Enter the session number1YES
≥Enter any four-digit number as the session number.
Receive All Data Files
1
m1LifeKit1Receive Ir data
≥You can paste the Ir data receiving function to the desktop. (See page 127)
2
Receive all1Enter your Terminal Security Code
1Enter the same session number as that entered at the
sending end1YES1YES
The stored data is deleted, then receiving starts.
Information
≥When you receive Phonebook entries in which still images are stored or mail to which
files are attached, and the multiple same still images or files are found, only one image
or file is stored.

Using Infrared Remote-controller Function

)
You can use the FOMA phone as a TV remote-controller by starting the
i-αppli program.
≥To use remote-control devices, you may need to download the software program for
those devices. [The pre-installed "Gガイド番組表リモコン (G Guide Program List
Remote-controller)" supports the infrared remote-controller function.] The key
transmission"
operation for the remote-controller differs depending on the software program.
≥This function does not work with some devices.
≥Communication might be affected by compatible devices and the ambient light.
≥You cannot use the infrared remote-controller during Self Mode.
Infrared Remote-controller
+ m - 7 - 9
≥Turn the FOMA phone's Infrared data port
to the front of a device to be operated. You
can operate within about 4 meters away
from the device.
≥The radiation angle of the infrared rays is
within ±15° from the center.
<Forwarding Image>

Communication Setting

For when you forward Phonebook entries using infrared rays, iC
communication, SD-PIM, or DoCoMo keitai datalink, you can specify
whether to forward the stored still images together.
1
m1Phonebook1Phonebook settings
1Forwarding image1ON or OFF
Within ±15° from
the center
Within about
4 meters
Infrared data port
m + 2 - 6 -
371