Advertisement
Access authentication when using PC browser
To authenticate FirstPass (user certificate), you must
install FirstPass PC software from the attached CD-
ROM and configure it. For details, see
"FirstPassManual" in the CD-ROM.
To view "FirstPassManual" (PDF format), Adobe
Reader (version 6.0 or later recommended) is
required. If Adobe Reader is not installed in your PC,
you need to download the latest version from the
Adobe Systems Incorporated website (Communication
fee is separately required for downloading). For
details, see the Adobe Systems Incorporated website.
■ Operating environment for the FirstPass PC
software
Item
PC
PC/AT compatible computer
OS
The Japanese version of
Windows 98SE, Me, 2000 or XP
Memory
Windows 98SE, Me, 2000: 32MB
requirements*
1
or more
Windows XP: 128MB or more
Hard disk
10 MB or more free disk space
capacity*
1
Browser
Microsoft
and later version
For Windows XP,
Microsoft
and later version
*1 May vary with the PC system configurations.
Conditions of packet communication and
64K data communication
To perform data communication from FOMA terminal,
the following conditions must be satisfied.
･
The PCs which may use a FOMA USB cable
(optional).
･
You must be within the FOMA service area.
･
Packet communication requires an access point
that supports FOMA packet communications.
･
64K data communication requires an access point
that supports FOMA 64 kbps or ISDN synchronized
64 kbps data communication.
However, even when the above requirements are
satisfied, you may not be able to perform data
communication if base station traffic is heavy, or the
signal quality is poor.
Glossary of Data communication
● Administrator privilege
A user level that provides complete access to all OS
functions in Windows XP and 2000. There must be
at least one user that has administrator privileges for
each PC. A user that has no administrator privileges
is not normally allowed to install/uninstall drivers and
software.
Requirements
®
Internet Explorer 5.5
®
Internet Explorer 6.0
● APN (Access Point Name)
String to identify a provider, etc. to connect by
packet communication. The APN for mopera U is
"mopera.net" and mopera is "mopera.ne.jp".
● cid (Context Identifier)
The registration number when writing packet
communication dialup connection (APN) information
to FOMA terminal. 10 numbers from 1 to 10 are
available for FOMA terminal.
By default, "mopera.ne.jp" is registered in cid1, and
"mopera.net" in cid3.
● W-TCP
A TCP parameter designed to fully utilize TCP/IP
transmission capacity during packet communications in
a FOMA network. This communication setting is
essential to enable full use of FOMA terminal capability.
Flow of setup for data communication
The setup work needed to connect FOMA
terminal to a PC to perform packet or 64K data
communication is as follows:
Install the communication configuration file ☛P4
Connect a PC to FOMA terminal ☛P3
Check the communication configuration file ☛P4
Install the FOMA PC configuration software ☛P6
(Easy Setup)
Packet communication
setup
● mopera U / mopera
☛P7
● Other providers ☛P8
Execute communication ☛P11 (Disconnect ☛P12)
Set up communications without using the FOMA PC
configuration software ☛P15
Connect ☛P23 (Disconnect ☛P24)
2
(Easy Setup)
64K data communication
setup
● mopera U / mopera
☛P10
● Other providers ☛P11
Advertisement
