2N Helios IP Configuration Manual page 86

Maximum packet size – set the size limit for the video RTP packets to be sent.
H.264 payload type (1) – set the payload type for video codec H.264
(packetisation mode 1). Set a value from the range of 96 through 127, or 0 to
disable this codec type.
H.264 payload type (2) – set the payload type for video codec H.264
(packetisation mode 2). Set a value from the range of 96 through 127, or 0 to
disable this codec type.
H.263+ payload type – set the payload type for video codec H.263+
(packetisation mode 3). Set a value from the range of 96 through 127.
Polycom compatibility mode – set SDP compatibility with some earlier
Polycom and Cisco phone models. If this mode in on, the intercom does not send
the
2N® Indoor Touch
This tab contains settings for connection of the 2N® Indoor Touch devices the
intercom. The main parameter is the access key, which secures the connection and
enables you to create multiple independent groups of intercoms and
devices within the local network. It also contains the video transmission settings.
Access key – set the access key to be shared by the intercom and 2N® Indoor
Touch. If the access keys do not match in the intercom and
the intercom cannot call the
Touch device cannot receive video from the intercom.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
sendonly flag in the SDP message in the video codec offer.
2N® Indoor Touch device and the
2N® Indoor Touch
2N® Indoor Touch,
2N® Indoor
86