2N Helios IP Configuration Manual page 27

users who are not provided with a display-equipped videophone. Enter the
address as follows: domain[:
or 192.168.22.111. The
in case there is Network Address Translation (NAT) between the PC and intercom
and the addresses have to comply with the router or another NAT-executing
device. The port1 (default value: 8003) parameter defines the destination port
for the UDP messages sent to
parameter defines the destination port for the
HTTP communication.
Note
Tip
Tip
Parallel call to following number – enable group calling, i.e. calling to more
phone numbers at the same time. You can call the first two numbers, the last
two numbers, or all of the three user numbers in parallel. Answering one call
automatically terminates the other calls.
Parallel call to following deputy – extend group calling to include the User
deputy.
User deputy – select a user to which the user calls will be routed in the event of
inaccessibility. Enter user position number or use search button. The deputy
setting is applied when the user fails to answer the call to any of its phone
numbers within the predefined timeout, or if the user numbers are inaccessible
for other reasons (time profiles, user deactivation).
Note
®
2N TELEKOMUNIKACE a.s., www.2n.cz
port1
The 'Helios IP Eye Address' function is available in selected 2N
IP models only (refer to the model and licence overview).
®
FAQ: 2N Helios IP Eye - How to set
Video Tutorial: SW application for IP intercoms - 2N
The User Deputy function is available in selected 2N
only (refer to the model and licence overview
port1 ][: port2 ], e.g.: computer.yourcompany.com
and port2 parameters are optional and are used
®
2N Helios IP Eye . The port2 (default value: 80)
2N
).
®
Helios IP Eye – intercom
®
Helios
® Helios IP Eye
®
Helios IP models
27