2N Helios IP Configuration Manual page 46

5.3.3 Camera
This menu is only available in the
internal camera or can be connected to an external camera. The camera signal can be
streamed directly into the call via a videophone, sent by E-mail, streamed via
ONVIF/RTSP to another device (a video surveillance device, e.g.), or simply HTTP
downloaded from the intercom in the JPEG format.
The following video signal sources can be used:
an internal integrated camera or external analogue camera (2N
Video Kit
a standard external IP camera supporting RTSP stream with codecs MJPEG
(640x480 max resolution) or H.264 (640x480 Base Line Profile max resolution).
The recommended framerate is 15 frames per second in either case. Higher
frame rates may result in undesired effects (less smooth playing).
The Camera
saturation and external IP camera login data if necessary. Refer to the Services
/ Phone, Services
call/streaming parameters.
List of Parameters
Common Settings
Default video source – set the default video signal source. Choose Internal
camera (or an analogue camera connected to the intercom) or
®
2N TELEKOMUNIKACE a.s., www.2n.cz
2N
only)
menu helps you set such camera parameters as brightness, colour
/ Streaming
®
Helios IP models that are equipped with an
and Services / E-Mail
®
Helios IP
menus for the video
External IP
46