2N Helios IP Configuration Manual page 75

Forward to Wiegand output - set the group of Wiegand outputs to which all
the received codes will be resent.
Transmitted code format - set the format for the codes to be
transmitted (Wiegand 26, 32, 37 and RAW).
Output Wiegand group - assign the output Wiegand group to which the codes
from the connected card readers or Wiegand inputs can be resent.
Inductive Loop Module Configuration
Maximum power - set the maximum transmission power for the induction loop
antenna. A higher transmission power means a wider range, but less power for
other intercom functions. The convenient default value is 0.25 W under normal
circumstances.
75
®
2N TELEKOMUNIKACE a.s., www.2n.cz