2N Helios IP Configuration Manual page 58

Language – set the language for the texts to be displayed. Choose one of the
seven pre-defined languages: English, Spanish, German, French, Russian,
Italian
the
Original language – download a preset XML file with all the texts to be
displayed.
User language – record, remove and load a localisation file of your own.
User font
displayed. Keep the TTF format and make sure that the file does not exceed 4
MB.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
and Czech . If you do not choose any of the available languages, select
User language and create a localisation file of your own; see below.
- record, remove and load a font of your own for the texts to be
Note
If none of the pre-defined languages is convenient for you, proceed as
follows:
Download the original language file (English).
Modify the file using a text editor (replace the English texts with
your own ones).
Upload the modified localisation file to the intercom.
Set Language Settings | Language
Check and correct if necessary the texts on the intercom display.
to Custom.
58