2N Helios IP Configuration Manual page 39

Output type – if you use the
output type to
mode, i.e. remains closed and controls the
using a specific pulse sequence. If you use the inverse mode (i.e. the door is
locked when voltage is applied), set the
Note
The table above includes a list of universal codes that help you activate switches from
the phone or intercom keypad. Up to 10 universal codes can be defined for each switch
(depending on the particular intercom model).
Code – enter a numeric code for the switch. The code must include 2 characters
at least but we recommend you to use four characters at least to make the code
accessible from the intercom numeric keypad. Codes 00 and 11 can't be entered
from numeric keypad. Code is confirmed with *. Code length up to 16
characters.
Accessibility – block the switch activation code entering from the intercom
numeric keypad or your phone.
Time profile – assign a time profile to the switch code to control its validity.
Note
®
2N TELEKOMUNIKACE a.s., www.2n.cz
Security . In the
®
2N Helios IP Vario
switching relay on the configuration connector.
®
2N Helios IP Force
and - terminals.
The extended switch activation is available with the Gold or Enhanced
Integration licence only.
®
2N Helios IP Security Relay module, set the
Security mode, the output works in the inverse
®
2N Helios IP
inverse output type.
– be sure to set the internal power supply and
– the security relay is connected to the DOOR +
Security Relay module
39