2N Helios IP Configuration Manual page 73

I/O Module Configuration
Module name – set the module name for input/output specification in the
SetOutput, GetInput and InputChanged objects in
Wiegand Module Configuration
The Wiegand module is equipped with the input and output
are mutually independent, have separate settings and can receive and send codes at
the same time. The Wiegand input helps you connect such equipment as RFID card
readers, biometric readers and so on. With the Wiegand output, you can connect the
intercom to the security system in your building, for example (to send IDs of the RFID
cards tapped on the RFID reader or codes received on any Wiegand input). The
Wiegand module is also equipped with one logical input and one logical output, which
can be controlled via 2N
®
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Helios IP Automation
®
2N Helios IP Automation
Wiegand interfaces
.
.
, which
73