2N Helios IP Configuration Manual page 15

®
2N TELEKOMUNIKACE a.s., www.2n.cz
Call prolongation confirmation signalling
Calls are time-limited in
(protection against blocking). Refer to the Miscellaneous
subsection for details .
Internal application launched
The internal application is launched upon
up or restart. A successful launch is signalled by this tone
combination.
Connected to LAN, IP address received
®
2N Helios IP logs in upon the internal application launch. A
successful LAN login is signalled by this tone combination
Disconnected from LAN, IP address lost
This tone signals UTP cable disconnection from
Disconnection is signalled by this tone combination
Invalid telephone number or invalid switch activation code
®
2N Helios IP allows the user to dial an extension number
directly using the keypad or enter the door unlocking code. An
invalid code is signalled by this tone sequence.
Default reset of network parameters
Upon power up, a 30 s timeout is set for the default reset code
entering. Refer to the Device Configuration subsection in the 2N
®
Helios IP Installation Manual for details.
Call end signalling
®
2N Helios IP enables the user to set a call end timeout to
avoid call blocking. Press a key on your VoIP phone to extend the
call time during this timeout.
Connected VoIP phone – 2N
This short tone signals successful connection between a VoIP
®
phone and 2N Helios IP
®
2N Helios IP for security reasons
®
2N
®
Helios IP call
.
Helios IP power
.
®
2N Helios IP .
.
15