2N Helios IP Configuration Manual page 129

®
2N Helios IP Vario
files from the TFTP server:
Configuration
Use the
defined by you. The intercom periodically downloads a file from the server and gets
reconfigured without getting restarted.
Note
List of Parameters
Firmware update enabled – enable automatic firmware/configuration updating
from the TFTP/HTTP server.
Address retrieval mode – select whether the TFTP/HTTP server address shall
be entered manually or a value retrieved automatically from the DHCP server
using Option 66 shall be used.
Server address – enter the TFTP (tftp://ip_address), HTTP (
or HTTPS (
DHCP (Option 66/150) address – check the server address retrieved via the
DHCP Option 66 or 150.
®
2N TELEKOMUNIKACE a.s., www.2n.cz
with MAC address 00-87-12-AA-00-11 downloads the following
hipv-firmware.bin
hipv-common.xml
hipv-00-87-12-aa-00-11.xml
Configuration tab to set automatic configuration download from the server
A few seconds' interruption of the display function occurs in the
display-equipped 2N
Therefore, we recommend you to update when the intercom traffic is very
low (at night, e.g.).
https://ip_address
®
Helios IP Vario
) server address manually.
models during reconfiguration.
http://ip_address )
129