NEC UX5000 Hardware Manual page 47

1. Determine the installation location for the wall bracket providing the appropriate spacing as shown below.
●
It is suggested that plywood first be installed on the wall where the KSU will be positioned. This
allows for secure anchoring of the screws which will be supporting the weight of the KSU(s).
2. Secure the two metal support U-brackets to the wall. Each bracket is attached to the wall using 3 screws
each. The brackets should be spaced at the distance shown below.
Wall
Chapter 1
Figure 1-39: ATTACHING THE METAL BRACKETS
Top edge of metal bracket "A"
1/2" 1"
16 7/8"
15 7/8"
1/2"
Bottom edge of metal bracket "H"
Chapter 1 - Installing the KSUs
13 7/8"
5 15/16" 5 15/16"
1"
1 - 37