NEC UX5000 Hardware Manual page 29

7.
8.
9.
10.
11.
Chapter 1
Provided with the battery box are 2 cables. Clip the short wire to the batteries at the front.
Figure 1-18: BATTERY BOX WITH BATTERIES AND CABLES
With the long 2-wire cable, clip each end to the batteries at the back.
Feed the opposite end of this cable into the KSU cabinet and over to the BATT connection.
Plug the cable into this connector.
●
Make sure the cable is pushed down into the cable guide to protect it from getting caught
in the fan when in operation.
Replace the metal plate containing the fan and resecure with the screw.
Push the battery box cage into the KSU and secure it with the 2 screws removed previously.
Chapter 1 - Installing the KSUs
1 - 19