2.
Secure the metal bracket to the Base KSU with the 3 screws provided.
3.
Align the back board connector up for the Base and Expansion KSUs and push the two KSUs together.
Make sure the two screws on the bracket are positioned high enough to allow cabinets enough space to
connect.
Chapter 1
Base Chassis
Bracket for Connection
Figure 1-8:
ATTACH THE EXPANSION BRACKET
Make sure screw has enough
clearance to fit into slot
Figure 1-9:
POSITION FOR CONNECTING SCREW
Chapter 1 - Installing the KSUs
1 - 11