Initial Setting Examples - Omron E5AZ User Manual

Initial Setting Examples

3-1

Initial Setting Examples

Interpretations and Meanings
of Typical Examples
24
On previous controllers, sensor input type, alarm type and control period were
set by the DIP switches. These hardware settings are now set in parameters
in setup menus. The
menus, and the amount of time that you hold the keys down for determines
which setup menu you move to. This section describes two typical examples.
Changing Setting Value
in-t
0
in-h
100
in-l
0
cntl
cntl
onof
onof
and keys are used to switch between setup
Indicates the continued presence of set data.
This should be pressed
to switching to any other data objectives.
Changing Numeric Value
Each interface' value and their selection
C 25
are realized through
0
Section 3-1
continuously prior
UD this option.