I/O Configuration and Main Functions
1-2
I/O Configuration and Main Functions
1-2-1
I/O Configuration
E5AZ/E5EZ
Temperature
input/analog input
*
CT input
(See note.)
*
Event input 2ch
(See note.)
Set point input functions from
external digital switches:
Run/Stop
*
Items marked with asterisks are options.
1-2-2
Basic Model
4
Controller
Note
Functions can be assigned individually for each output by changing the set
values for the control output 1 assignment, the control output 2 assignment,
the alarm 1 assignment, the alarm 2 assignment, and the alarm 3 assignment
in the advanced function setting level.
E5@Z - @ 3 @ @
Note
Options 1 and 2 are supported when using an E53-AZM Option Board.
OUT1
Control output 1
Control output 2
OUT2
Heating/
cooling
Standard
ALM3
Alarm 3
ALM2
Alarm 2
ALM1
Alarm 1
*
HB
HBA
Input error
*
Communications
function
Option 2: Blank: Not available.
01:
RS-232C
03:
RS-485
B:
2 event inputs
Option 1: Blank: Not available.
H:
Heater Burnout Alarm
3:
Three alarms
Control Output: R: Relay Output
Q: Voltage Output
C: Current Output
A: Output Unit can be mounted.
96 × 96 mm (W × H)
Size:
A:
96 × 48 mm (W × H)
E:
Section 1-2
Control output 1
Alarm output 3
Alarm output 2
Alarm output 1