Omron E5AZ User Manual page 50

Setting Output Specifications
Operation Procedure
1,2,3...
Operation level
C
30
0
Initial setting level
Input type
in-t
5
Temperature unit
d-u
c
Control period
cp
(OUT1)
20
Direct/reverse
C
oreV
operation
OOor-r
Operation level
PV/SP
C 30
0
In this example, let's monitor the "input type", "temperature unit", "direct/
reverse operation" and "control period (OUT1)" parameters.
"input type" = "5": K thermocouple
"temperature unit" = "c": ° C
"direct/reverse operation" = "or-r": reverse operation
"control period (OUT1)" = "20 (secs)"
1. Press the key for at least three seconds to move from the "operation
level" to the "initial setting level".
2. The input type is displayed. When you are setting the input type for the first
time, "5": K thermocouple is set. To select a different sensor, press the
or key.
3. Select the "temperature unit" parameter by pressing the
is "c": ° C. To select "f": ° F, press the
4. Select the "control period (OUT1) parameter by pressing the
Default is "20".
5. Select the "direct/reverse operation" parameter by pressing the
Default is "or-r": reverse operation. To select "or-d": direct operation,
press the key.
6. To return to the "operation level", press the
ond.
Section 3-5
key. Default
key.
key.
key for at least one sec-
key.
31