Omron E5AZ User Manual page 134

Advanced Function Setting Level
Input digital filter
Function
Setting
pVad
Additional PV display
Function
Setting
• Sets the time constant of the input digital filter. The following figure shows
the effect on data after passing through the digital filter:
PV before passing through filter
A
Time
constant
Input digital filter
Setting Range
0.0 to 999.9
• This parameter adds the facility of displaying only the PV. It is added to
the top of the operation level. It is used to give the option of displaying the
PV and SP or just the PV only.
Setting Range
on: Displayed / off: Not displayed
PV after passing through filter
0.63A
Unit Default
Second 0.0
Default
off
Section 5-6
Time
115