Table of Contents
Advertisement
Service tool kit
OA
with service toolkit
BMW Motorrad has put together
a service tool set suitable
for your motorcycle for more
advanced service operations
(e.g. removing and refitting
the wheels). This tool set is
available from your authorised
BMW Motorrad Retailer.
https://www.motorcycle-manual.com/
Front-wheel stand
Installing the front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front-wheel stand without
also using the auxiliary stand
Risk of damage to parts if vehicle
topples
Place the motorcycle on an
auxiliary stand before lifting
the front wheel with the
BMW Motorrad front-wheel
stand.
Place the motorcycle on a suit-
able auxiliary stand.
OE
with centre stand
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Use basic stand with tool num-
ber (83 30 0 402 241) in com-
bination with the front-wheel
holder (83 30 0 402 242).
Loosen the mounting bolts 1.
Push the two adapters 2 apart
until the front suspension fits
between them. Adjust the ad-
apter studs to suit the front
suspension.
Use the retaining pins 3 to set
the front-wheel stand to the
desired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
10
197
z
Advertisement
Table of Contents
