Belkin OmniView PRO2 Rack User Manual page 27

Using the Console
Setup-Menu Page
The "Setup Menu" page allows you to set the time intervals for the AutoScan feature
and OSD display time, enable the password security feature, and program hot keys.
Setup-Menu-Page Keyboard Commands
Command
Enter
Esc
AutoScan Time
This specifies the amount of time the Console remains on a server before switching
to the next server while in AutoScan mode. You may choose among four scan-time
intervals: 7, 15, 30, or 60 seconds. To change the scan time, use the arrow keys to
navigate to the desired intervals, and press "Enter" to select and save the setting.
OSD-Display Time
This specifies the amount of time that can elapse before the OSD menu will disappear
due to user inactivity. You may choose among four time intervals: 7, 15, 30, or 60
seconds. To change the display-time interval, use the arrow keys to navigate to the
desired interval, and press "Enter" to select and save the setting.
Note: If there are secondary KVM switches connected, and the AutoScan time and
time-out settings are set on the primary KVM switch (the Console), the settings will
also apply to all secondary KVM switches.
27
Function
Navigate to different settings
Select and save the setting
Return to the main OSD menu